User Instructions

ManualsBrandsShanghai Biancheng Electronic Technology ManualsElectronicsRestaurant Pager System

Guest Paging System BCT-6980

1. Diagram

2.Parameter

Transmitter

Pager

Input Power

DC12V/1.5A

Working voltage

Li-ion 3.7V 200mAh

Frequency

433.92MHz

Frequency

433.92MHz

Transmit Power

+23dBm

Standby Current

<12mA

Standby Power

<600mW

Standby Duration

24h

Modulation Type

OOK

Sensitivity

-108dBm

Charging Pagers

20pcs

Max Distance

500m

Max Capacity

998pcs

Alarm Mode

Vibration/Buzzer/Flashing

Keyboard

Touching Pad

Alarm Time

1-999s settable

Material

ABS

Material

ABS

Dimensions

290*155*32mm

Dimensions

100*50*10mm

* The parameters were measured in laboratory. They may vary depend on using cycles and environment.

Summary of content (5 pages)

PAGE 1
Guest Paging System BCT-6980 1. Diagram 2.Parameter Transmitter Pager Input Power DC12V/1.5A Working voltage Li-ion 3.7V 200mAh Frequency 433.92MHz Frequency 433.
PAGE 2
3.
PAGE 3
PAGE 4
. Settings Note： 1. Press SET / Gear button to enter F1. 2. : Return to the previous menu & Cancel the operation. 3. : In working state, they are used to check recent 10 called numbers. The showing number can be re-called by pressing CALL. In setting mode, they are used to switch from F1 to F4. 4. In F2, use UP or DOWN buttons to choose from 000 to 010 settings. All pagers must be in the charging slot, So functions from 004 to 010 can be changed on the pager.
PAGE 5
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.