Service Manual

INVUE is international company providing retail security products. Microplay MS1002 is our

latest build for interoperatable device to help the retail shop leverage their sales and reduce

the cost.

Power supply:

Retailers are asked to use INVUE PS412 adaptor for the device power supply. Device

consume 5V 1A ~ 1.5A power from the adaptor.

Switch on:

Plug on the USB-A plugger into the adaptor, device will switch on by itself. The INVUE

welcome screen will be showed and keep around 30 second for first time power on.

MS1002 build on the Androidd 7.0 OS, but don't have GMS related apps. retails are

restricted for installing the apps in spite of microsigns browser.

Reset:

There is a reset hole in the back side of the device. User can reset the device in case some

abnormal issues happen.

Microsings browser

See the manual for Microsigns system manual for service and clients managment. Microsign

browser is used to build up the bridge with user and client's server,

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

2ATPR-INVUE-MS1002

ShangHai B&M technology Co., LTD

MicroPlayer5 MS1002

PAGE 1
ShangHai B&M technology Co., LTD 2ATPR-INVUE-MS1002 MicroPlayer5 MS1002 INVUE is international company providing retail security products. Microplay MS1002 is our latest build for interoperatable device to help the retail shop leverage their sales and reduce the cost. Power supply: Retailers are asked to use INVUE PS412 adaptor for the device power supply. Device consume 5V 1A ~ 1.5A power from the adaptor. Switch on: Plug on the USB-A plugger into the adaptor, device will switch on by itself.
PAGE 2
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.