USER’S MANUAL Industrial Barcode printer BTP-7400 Shandong New Beiyang Information Technology Co.
BTP-7400 User’s Manual Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to improve products as new technology, components, software, and hardware become available. If users need further data about these products, please feel free to contact SNBC or our local dealer.
BTP-7400 User’s Manual SNBC has passed the following certifications: ISO9001 Quality Control System Certification ISO14001 Environmental Management System Certification OHSAS18001 Occupational Health and Safety Management System Certification IECQ QC 080000 Hazardous Substance Process Management System Certification -2-
BTP-7400 User’s Manual Safety Instructions Before installing and using the printer, please read the following items carefully. 1 Safety warning The print head is a thermal element and it is at a high temperature during printing or just after operation, therefore do not touch it or its peripherals for safety’s sake . The print head is an ESD-sensitive device. To prevent damage, do not touch either its printing parts or connecting parts.
BTP-7400 User’s Manual motors or other devices that may cause the fluctuation of voltage; 8) Disconnect the power when the printer is deemed to idle for a long time; 9) Don’t spill water or other electric materials into the printer (e.g. metal).
BTP-7400 User’s Manual Contents 1 Product introduction........................................................................... - 1 1.1 Introduction.................................................................................. - 1 1.2 Unpacking and checking........................................................... - 2 1.3 Appearance and modules..........................................................- 3 1.4 Introduction of main modules....................................................
BTP-7400 User’s Manual 3.5.3 Print method....................................................................... - 29 3.5.4 Print width...........................................................................- 29 3.5.5 Speed settings................................................................... - 30 3.5.6 Darkness settings..............................................................- 31 3.5.7 Action when power on / press down the print head.... - 32 3.5.8 Print position adjustment..................
BTP-7400 User’s Manual Appendix 1.3 Technical specifications of paper..................... - 66 Appendix 2 Self-test page..............................................................- 68 Appendix 3 Print and paper output position................................- 70 Appendix 4 Communication interface.......................................... - 71 Appendix 4.1 Serial interface.................................................... - 71 Appendix 4.2 Parallel interface............................................
BTP-7400 User’s Manual 1 Product introduction 1.1 Introduction BTP-7400 industrial barcode printer, with high performance, is the ideal office barcode label printing equipment. It is suitable for real-time label printing / batch product label printing / transportation and logistics label printing /ticket printing at railways, airports and stations / postal bag tag printing, etc.
BTP-7400 User’s Manual Adopting heat history and auto temperature adaptation control; Adopting industrial print head with long lifetime and high printing quality; Supporting continuous paper, label paper, marked paper, perforated paper, etc. 1.2 Unpacking and checking Open the packaging and check the items according to the packing list. Please contact your local dealer or the manufacturer if there is any shortage or damage. Fig. 1.2.
BTP-7400 User’s Manual 1.3 Appearance and modules 1—Button 2—LCD 3—Indicator light 4—right cover 5—Transparent window 6—Tear-off bar, Peel-off bar 7—Ribbon peel-off plate Fig.1.3.1 8—Pressure adjustment knob 9—Pressure position lock knob 10—Ribbon retraction roller 11—Ribbon release shaft 12—Paper holder 13—Right paper guide 14—Ribbon release spanner 15—End cover of upper path 16—Print head uplifting spanner 17—Buffer module 18—Platen roller 19—Print head 20—Print head adjustment block Fig.1.3.
BTP-7400 User’s Manual 25—USB A interface 26—USB B interface 27—Ethernet interface 28—Serial interface 29—Parallel interface 30—Expansion interface (optional) 31—Power switch 32—Power interface Fig. 1.3.4 1.
BTP-7400 User’s Manual 2 Printer installation 2.1 Installation position Flatly place the printer on the operation table, which must be waterproof, moisture proof and dustproof. The maximal tilted angle should not exceed 15° during installation. 2.2 Printer host connection 1) Ensure the printer is turned off; 2) Connect one end of the AC power input cable with the printer host; 3) Connect the other end of the AC power input cable with the 220V power socket.
BTP-7400 User’s Manual 2.4 Paper roll installation (tear-off mode) 1) Open the right cover of printer, turn the print head uplifting spanner (16) backward to the angle shown in the figure, and turn the right paper guide (13) to horizontal position (see Fig. 2.4.1); Fig. 2.4.1 2) Install the paper roll leftward on the paper holder, pull out and place the paper head flatly in the paper path, align it leftward and slightly tighten the paper with the movable paper guide (see Fig. 2.4.2); Fig. 2.4.
BTP-7400 User’s Manual 3) Turn the right paper guide (13) leftward to make it vertically and abut the paper roll (ensure the paper roll can rotate smoothly), and turn the print head uplifting spanner (16) forward to press down the print head. Detail operation refers to the Fig. 2.4.3. Fig. 2.4.3 Caution: The print side of paper is upward. If marked paper is used, the black mark is downward. Continuous paper with the black mark on the print side is not supported. 2.
BTP-7400 User’s Manual lead the ribbon head go under the print head module and wind the ribbon on the ribbon rewinding roller from its underside; rotate the roller to tighten the ribbon (see Fig. 2.5.1); Fig. 2.5.1 3) Turn the print head uplifting spanner forward to press down the print head and lead it to lock status. Detail operation refers to Fig.2.5.
BTP-7400 User’s Manual Fig. 2.5.2 Caution: Determine the print method: If thermal transfer printing is selected, the ribbon needs to be installed; if thermal printing is selected, the ribbon does not need to be installed. Under normal condition, the selected ribbon should be wider than the print media. Keep the ribbon as flat as possible during ribbon installation in case the ribbon is cockled or damaged during printing.
BTP-7400 User’s Manual 2.6 Starting the printer 2.6.1 Power-on and self-test 1) Ensure the power adapter and the communication cable are connected correctly, and turn on the printer; 2) The printer starts the self-test. After the self-test is finished, the LCD screen displays the manufacturer LOGO and status information or product model; 3) If power-on action is set, the printer will perform power-on action.
BTP-7400 User’s Manual Caution If the printer cannot be started or cannot work normally after it is started, please contact your local dealer or the manufacturer in time. 2.6.2 Print the self-test page 1) Installed the media, turn on the power switch, click on the 'Menu / Set' button to enter the menu, select "Self-test", and click "Menu / Set" button, then the printer will feed the paper and print the self-test page (sample refers to Appendix 2.
BTP-7400 User’s Manual 4) Select the current system type, and click “Next”; 5) Set the printer port. “LPT1” is set as the default print port, but users can select it according to actual needs. If it is a serial port driver in Windows 2000 or above system, please select “BYCOMx” (x equals to 1, 2, 3, 4, 5, 6, 7 or 8), and then click “Install” to end the installation.
BTP-7400 User’s Manual 3 Printer operation Caution The printer parameter settings are subject to the last settings. The printer parameters can be set via the menu of printer operation interface, user software (including drivers and the third-party software), printer commands, etc. For example, the printer menu and the printer drivers in computer can be used to set the print speed.
BTP-7400 User’s Manual Fig. 3.1.1 The pressure needs to be adjusted under the following conditions: 1) When the print head pressure cannot meet the requirement (e.g. the ribbon cannot be rewound smoothly), turn the print head pressure adjustment knob to increase the pressure; 2) Different pressure size and pressure position can be selected when use label paper with different widths for printing. The two print head modules are symmetrical with the print contents.
BTP-7400 User’s Manual 3.2 Sensor position adjustment When the paper width is changed, the sensor position can be adjusted according to the following steps: 1) Counter-clockwise rotates the thumb knob to loosen the sensor position limitation block (refer to the curved arrow in Fig. 3.2.1); 2) Observe the mark position, and move the sensor to the position below the mark; 3) Pull the sensor spanner and move the sensor to the required position(refer to the arrow direction in Fig. 3.2.
BTP-7400 User’s Manual Fig. 3.2.
BTP-7400 User’s Manual 3.
BTP-7400 User’s Manual 3.3.1 Function of indictor light 1) Function of indicator light LED Name Power LED Status Explanation Always on Printer is already turned on. Pause LED Always off Printer is not in pause status. (Yellow) Always on Printer is in pause status. Error LED Always off Printer is not in error status. (Red) Flash Data LED Always off Printer is not printing. (Yellow) Always on Printer is printing. (Green) Printer is in error status. Table 3.3.
BTP-7400 User’s Manual Cutter error Out of ribbon Print head temperature is abnormal Circularly flashes 4 times Circularly flashes 4 times Circularly flashes 5 times Cannot find Circularly flashes the mark 6 times No print head Circularly flashes 9 times “xxx updating” example Updating prompt Caution Always on Table 3.3.1-2 Troubleshooting method refers to section 5.1 “Abnormity and solution”.
BTP-7400 User’s Manual 3.3.2 Function of Button Button Printer Function explanation status Under standby status, the user can press [Menu] Standby ① button for a short time to enter the menu display interface.(① -⑥refer to below notes) In menu display interface, the [menu] and MENU Menu ② navigation buttons can be cooperated to perform relevant configuration or query operation. When the printer is in the status of text input, e.g.
BTP-7400 User’s Manual CANCEL Press [Pause] button to stop the current print job Printing temporarily, and then press the [Cancel] button to status cancel the print job. Press [Exit] button for a short time to exit for one Menu menu level, and press [Exit] button for a long time to exit directly. When exit to the standby interface, there will give EXIT a prompt that save Menu or not if the printer configuration is changed, you can press the [Exit] button to exit directly without saving.
BTP-7400 User’s Manual button to save the configuration. When in the mileage information page, press the Menu Navigation [navigation left] button to switch to the power history and the total recording history (page turning function). left Digital input When in the Leaf-menu digital input interface, the current digital interface moves one unit to the left.
BTP-7400 User’s Manual 3 Text input: The interface that needs to input ASCII code from 0x20 (space) to 0x7e, e.g. to configure the SSID or password of Wi-Fi.
BTP-7400 User’s Manual 3.4 Function of calibration 3.4.
BTP-7400 User’s Manual → Settings →Print settings→Paper type; or print self-test page).
BTP-7400 User’s Manual correct (refer to 3.
BTP-7400 User’s Manual Paper type in Actual paper type driver Continuous paper continuous paper without mark Black marked Paper with marks pre-printed, paper positioning basing on the mark Sensor type Transmissive sensor or reflective sensor Reflective sensor Label paper with base paper, positioning basing on the gap Label paper Transmissive sensor between the adjacent label Perforated paper with holes or notches for positioning Transmissive sensor Table 3.5.
BTP-7400 User’s Manual Print mode Paper stop position after Application printing The printed labels are no need to be taken away immediately, but can be put into use Rewinding mode Print head together after batch printing. Since the stop position is at the print head under this mode, the printer has no paper retraction action before printing. Tear-off mode After completing the label printing, the label Tear-off bar space stops at the tear-off bar, so that the user can tear off the label easily.
BTP-7400 User’s Manual 3.5.3 Print method Set method: Menu → Settings → Print settings → Print mode →Select appropriate print method. The printer supports following two print methods: 1) Thermal: need to use the thermal paper, no need to use the ribbon; 2) Thermal transfer: no need to use the thermal paper, need to use the ribbon.
BTP-7400 User’s Manual 203DPI model is 832 dots, and the physical width of print head for 300DPI model is 1248 dots. Caution If the user software can also set the print width, the print width parameters should be set in the user software. 3.5.5 Speed settings 1) Print speed Set method: Menu → Settings → Print settings → Print speed (or Menu →Common settings →Print speed). This method is used to set the paper feeding speed during printing with a unit of inch/second.
BTP-7400 User’s Manual Caution If the user software can also set the print speed, the print speed parameters in the user software should be set; As for the paper / ribbon with poor quality, the print quality will be degraded if a higher print speed is set, e.g. the printout is in light color or has trails and other problems.
BTP-7400 User’s Manual Material of ribbon Features of media Max. Max. speed darkness (inch/second) 30 12 30 10 30 6 It can be Can be used for Full wax high-speed printing, the storability is poor, and the printout can be scraped easily. Semi-wax and semi-resin Full resin Used for medium-speed printing, the storability is intermediate between full wax and full resin. Used for low-speed printing, the storability is the best. The settings of darkness should match with the print speed.
BTP-7400 User’s Manual Actions Description The printer has no action after powering on / pressing down the print head. Advantages: no blank paper is fed after powering on / pressing down the print head, which can save paper. Disadvantages: Because the printer prints directly after No action powering on / pressing down the print head, without positioning basing on the mark, the print position of the first label depends on the manual paper loading position (e.g.
BTP-7400 User’s Manual 3.5.8 Print position adjustment Caution The parameters for position adjustment that set in this section may be modified by the user software, and the settings in upper level software will prevail. In the actual application, if the upper level software is inconvenient to adjust, please refer to 3.6 physical distance setting. The adjustment of position in the menu takes dot as the unit, for 203DPI, 1 mm equals to 8 dots; for 300DPI, 1 mm equals to12dots.
BTP-7400 User’s Manual Caution Fig. A indicates that the print position is upper than the correct position. Adjust it to the negative direction; Fig. B indicates that the print position is lower than the correct position. Adjust it to the positive direction. 2) Transversal print position adjustment When the printout is like Fig. D and Fig. E, the user should adjust the transversal print position to Fig.F.
BTP-7400 User’s Manual 3) Tear-off position/Cut position/Peel-off position When the printout is like Fig. G and Fig. H, the user should adjust the tear-off position to Fig.J. Fig. 3.5.8.3 Caution Fig. G indicates that the tear-off position is upper than the correct position. Adjust it to the negative direction; Fig. H indicates that the tear-off position is lower than the correct position. Adjust it to the positive direction.
BTP-7400 User’s Manual 3.6 Physical distance setting Caution This function can be put into use only after getting the manufacturer’s authorized password. This function is used to set the physical distance between various components of the printer in the unit of dot. For 203DPI, 1 mm equals to 8 dots; for 300DPI,1 mm equals to12dots.Set method: Menu → Settings → Physical distance Settings →Enter password →Set related parameters.
BTP-7400 User’s Manual 3.7 Serial interface settings Caution When the printer is connected to the host via the serial interface, if the printer does not work, firstly make sure that the cables are reliably connected, and then perform the settings according to this section to make the printer serial interface parameters match with the host serial interface parameters. 1) Baud rate Query or set the baud rate to match with that of the host.
BTP-7400 User’s Manual 4) Parity bit Query or set the parity bit to match with that of the host. The parity bit can be set to: no parity, even or odd. Set method: Menu → Settings →Serial interface settings→Parity bit. 5) Handshake mode Query or set the handshake mode to match with that of the host. The handshake mode can be set to: hardware handshake, software handshake, or hardware handshake + software handshake. Set method: Menu → Settings →Serial interface settings→Handshake mode.
BTP-7400 User’s Manual network. The user can select wireless network in the following method: Menu → Settings → Network settings → Network selection →Wireless network. Caution Before use a wireless network, please make sure the printer is configured with a wireless module; otherwise the wireless network will not function. 2) IP address When the IP acquisition method is DHCP, the user can query the current acquired IP address.
BTP-7400 User’s Manual 5) Port number Query or set the Ethernet TCP port number of printer according to demands. The default value is 9100. 6) MAC address Query the MAC address of current network (wired or wireless). 7) IP acquisition method When the IP acquisition method is set to DHCP, the printer will automatically obtain the IP address, subnet mask, default gateway and other network parameters.
BTP-7400 User’s Manual B) Basing on the setting methods described above, correctly set the printer's IP address, subnet mask, default gateway, port number, and IP acquisition method. C) Set following contents of printer via the menu in the method: Wireless settings →Router mode.
BTP-7400 User’s Manual D) After the printer completing the restart, query if the printer has successfully connected to the router in the following method: Network settings →Wireless status, the displayed contents include the SSID of current wireless network, connection status with the host (connected / not connected), signal strength (displayed in percentage) that from the printer to the base station when the wireless network is configured to base station mode.
BTP-7400 User’s Manual 3.9 Parallel interface settings 1) Parallel interface mode Configure the mode of parallel interface. There are two modes can be selected: byte mode and compatibility mode. When the user needs to query the related parameters of printer from the host, the byte mode should be selected. When the host does not need to query the parameters of printer, the compatibility mode should be selected. 2) Set ACK of Parallel interface Configure the ACK of printer’s parallel interface.
BTP-7400 User’s Manual 3.10 Date and time If the printer is equipped with a clock module, the user can set the date and time in following method: Menu → Settings →Date and time. 1) Date The user can query and configure the date for current system by this configuration, setting the date for current system via the cooperation of navigation and menu buttons.
BTP-7400 User’s Manual 3.11 Offline printing Under this mode, the printer can work independently without connecting to the computer, which can save the user’s work space and cost. The user can copy the files to be printed in one U disk or SD card or download the files to the printer's internal FLASH disk in advance, and then select the files stored in corresponding drive letter, and input and confirm the quantity to be printed for the printer to start printing.
BTP-7400 User’s Manual 3.12 Service 1)Factory default settings The printer can be recovered to the factory default settings via this configuration. Caution When the parameters set by the user is in disorder or the printer has any functional problems, the user can try to solve the problems via recovering the factory default settings.
BTP-7400 User’s Manual 3.13 Consumables library This function is suitable for applications that require frequent different paper switching. In the conventional mode, the printer needs to start manual calibration or automatically start calibration after changing with different paper, which wastes the paper.
BTP-7400 User’s Manual 3) Delete all If the previously stored consumables will not be used any more, or the relationship between the number and consumables is confused, all the stored numbers can be deleted. 4) Delete the specified number With this function, the user can delete the corresponding number of a certain consumables that will not be used any more. 5) Update the number With this function, the user can change the number to another number.
BTP-7400 User’s Manual 3.14 File operation Caution This function settings need password authorized by the manufacturer. 1) Upgrading The user can copy the upgrading files to a U disk in advance to upgrade the firmware via the U disk, including the upgrading of applications, LCD program, monitoring program, EEP configuration and all programs.
BTP-7400 User’s Manual 5) Paste Configuration description: This function cooperates with the above cut and copy functions. The user should perform copy and cut actions before pasting, and then select corresponding directory to paste the previously cut or copied files or directory. Operation method: File operation → Copy→ Select the letter→Select the directory.
BTP-7400 User’s Manual 3.15 Printer debugging Caution This function settings need password authorized by the manufacturer. 1) Run the data capture feature When the printer runs abnormally and needs debugging, the original DUMP mode is to print out all the data, it wastes the consumables and the printout is inconvenient to use.
BTP-7400 User’s Manual mode via this operation. Also, the printer can exit from the DUMP mode via the FEED button. 3.16 Sensor settings Caution This function settings need password authorized by the manufacturer. 1) Light emission intensity Query and set the light emission intensity of sensors, including the transmissive sensor, reflective sensor and ribbon sensor. The parameters of light emission intensity are generally obtained by the calibration function (see 3.4 Function of calibration).
BTP-7400 User’s Manual reflective sensor and ribbon sensor.
BTP-7400 User’s Manual 4 Routine maintenance Clean the print head, platen roller and sensor every month according to the following steps. If the printer works in a tough environment, the maintenance times can be properly increased. 4.1 Cleaning the print head When any of the following cases occurs, the print head should be cleaned: Printout is not clear; Feed or retract paper with big noise; Something else sticks onto the print head.
BTP-7400 User’s Manual The printer cannot identify marks effectively. Follow the steps below to clean the paper sensor: 1) Turn off the printer and open the right cover; 2) Release the rotation knob of sensor and pull the sensor to the outmost position; 3) Wipe off the dust and stains on the surface of the transmissive sensor (refer to Fig.4.2.1 and Fig.4.2.
BTP-7400 User’s Manual Fig. 4.2.2(Sectional view) 4.3 Cleaning the platen roller When any of the following cases occurs, the platen roller should be cleaned: Printout is not clear; Feed and retract paper with big noise; Something else sticks onto the platen roller. Follow the steps below to clean the platen roller: 1) Turn off the printer and open the right cover; 2) Lift up the print head module and find out the platen roller.
BTP-7400 User’s Manual and then press down the print head module and close the right cover. Caution Before starting routine maintenance of printer, make sure the printer is turned off; Do not touch the surface of print head with hands or metal. Do not use forceps in case it scratches the surface of the print head, platen roller and sensor; Do not use organic solvent like gasoline, acetone etc.
BTP-7400 User’s Manual 5 Troubleshooting When the printer has a malfunction, please handle it with reference to this charter. If it still cannot be cleared, please contact the manufacturer or your local dealer. 5.1 Abnormity and solution When the printer has malfunctions or abnormal conditions, the error LED will flash, and the LCD will display the current error.
BTP-7400 User’s Manual The surface of mark sensor is contaminated The paper roll type dos not match with the mark sensor type Out of ribbon Ribbon jams Ribbon sensor failure Cutter abnormity Print head temperature is abnormal Mark error No print head is installed Poor communication The printer does not be configured with cutter The working environment temperature is too high, and it leads to overheated print head Paper jams in the path and it leads to accumulation of heat and overheated print head The
BTP-7400 User’s Manual 5.2 Print quality problems As shown in the above figure, A is too dark, B is a little dark, D is a little light, E is too light, the user can adopt following methods for each print quality problem: Malfunction Reason The printout is unclear or has stains Print head or platen roller is dirty. The paper does not match with the ribbon. The print darkness is too low. The print speed is too high. The printout is dark The pressure of print head is too small.
BTP-7400 User’s Manual 5.3 Ribbon problems Malfunction Reason The ribbon is not installed correctly. The ribbon wrinkles or cracks. The pressure of print head is uneven. The print darkness is too high. Solution Correctly install the ribbon and paper roll. Adjust the pressure of print head to obtain even pressure on both sides of paper. Reduce the print darkness. 5.4 Positioning and calibration problems Malfunction Reason Does not preform calibration after replacing paper.
BTP-7400 User’s Manual Appendix Appendix 1 Technical specification Appendix 1.1 Main technical specifications BTP-7400(200DPI)param eters BTP-7400(300 DPI) parameters Resolution 203DPI 300DPI Print method Thermal/Thermal transfer Item Print width (Max.) Print speed (Max.) Print 104mm 106mm 305mm/s 203mm/s CPU 32bit RISC embedded microprocessor Memory SDRAM：256MB FLASH：256MB Extended FLASH: supports U disk or SD card in FAT32 format.
BTP-7400 User’s Manual Paper type Media Paper roll OD (Max.) Paper roll width (Max.) Paper roll ID(Min.) Paper roll ID(Max.) Ribbon length(Max.) Ribbon ID Paper output mode Character enlargement/rota tion Character set Character Barcode Graphics Graphics Barcode Continuous paper, label paper, perforated paper, marked paper, etc. Max Φ203mm 120mm Φ38mm(1 inch paper holder, optional) Φ76.2mm 600m Φ25.
BTP-7400 User’s Manual adapter Output Environme ntal requiremen ts Operating environment Storage environment Power adapter Overall size 480mm(L) ×280mm(W)×370mm(H) Weight About 19 Kg DC 24V，4.5A +5℃～45℃，20%～90%(40℃) -40℃～60℃，20%～93%(40℃) Appendix table 1.1.1 Appendix 1.2 Technical specifications of ribbon Item Ribbon size Explanation Refer to Appendix table 1.1.
BTP-7400 User’s Manual Appendix 1.3 Technical specifications of paper The maximum value of paper height depends on the size of printer configured memory. 1)Specification of continuous paper(unit：mm) Type Illustration Index Continuous paper Print paper without width:25≤a≤118 adhesive Base paper width:25≤a≤118 Continuous Print paper paper with width:25≤b≤118 adhesive Paper margin width: c≤1 Appendix table 1.3.
BTP-7400 User’s Manual 2)Specification of non-continuous paper(unit: mm) Type Illustration Index Base paper width: 25≤a≤118 Paper margin width: Non-continuous b≤1 label paper with Label width: adhesive 25≤c≤118 Label height:: d≥10 Gap width: e≥2 Punched paper width: 25≤a≤118 Perforated paper Non-continuous height: b≥10 perforated Detection hole paper without position: c≤a/2 adhesive Detection hole width: d≥5 Detection hole height: e≥2 Marked paper width: 25≤a≤118 Non-continuous Marked pap
BTP-7400 User’s Manual Caution Select appropriate ribbon according to detail media type and usage; User the ribbon recommended by the media supplier to print as much as possible. Appendix 2 Self-test page The self-test page includes printer configuration information, including printer name, version number, current configuration related to the printing, serial interface, Ethernet interface, etc. Printer configuration information BTP-7400(203DPI).................. MODEL FV1.000......................
BTP-7400 User’s Manual 8.BITS........................................ DATA BITS NONE........................................ PARITY DTR/DSR................................... HOST HANDSHAKE NONE......................................... PROTOCOL <~>..7EH.................................... CONTROL CHAR <^>..5EH.................................... COMMAND CHAR <,>..2EH..................................... DELIM CHAR NO.MOTION...............................MEDIA POWER UP NO.MOTION.............................
BTP-7400 User’s Manual 192.168.0.1...............................GATEWAY D0FF50317A56........................MAC 9100..........................................RAWPORT ENABLE...................................TIMEOUT CHECK 300............................................TIMEOUT VELUE PREMANENT...........................IP RESOLUTION Appendix 3 Print and paper output position Appendix Fig.3.
BTP-7400 User’s Manual Appendix 4 Communication interface Appendix 4.1 Serial interface 1) Interface signal Pin Signal name Signal direction Function 1 None 2 RXD Input Data input 3 TXD Output Data output 4 DTR Output Data terminal ready 5 SG － Signal ground 6 DSR Input Data device ready 7 RTS Output Request transmission 8 CTS Input Allow transmission 9 FG － Frame ground Appendix table 4.1.
BTP-7400 User’s Manual PC Printer TXD---------------RXD RXD---------------TXD SG ----------------SG Appendix 4.2 Parallel interface Parallel interface works under IEEE1284 compatible mode.
BTP-7400 User’s Manual Appendix 4.3 USB interface USB interface meets USB2.0 protocol standard. USB interface transmits signal and power via a four–wire cable, as shown in the following figure: Appendix Fig. 4.3.1 USB cable Wire D+ and D- in appendix Fig. 4.3.1 are used for signal transmission, and the VBUS is +5V.
BTP-7400 User’s Manual Appendix 4.4 Ethernet interface The Ethernet interface is an optional interface. 1) Network interface parameter Meets the standard communication protocol of 10/100M BASE-T in IEEE802.3. Appendix Fig. 4.4.1 Socket Pin Signal name Function 1 TX+ Data transmit + 2 TX- Data transmit - 3 RX+ Data receiving + 4 NC Reserved 5 NC Reserved 6 RX- Data receiving - 7 NC Reserved 8 NC Reserved Appendix table 4.4.
BTP-7400 User’s Manual Appendix 4.5 Wireless LAN interface The wireless LAN interface is an optional interface. Supports IEEE 802.11b, IEEE 802.11g, IEEE 802.
BTP-7400 User’s Manual Appendix 5 Guide for paper loading under peel-off mode When using label paper with adhesive, the user can set the paper output mode to peel-off mode. When the peel-off mode is selected, follow the steps below to wind the base paper on the rewinder during paper loading: 1) Remove the front labels for about 1 meter long and ensure the base paper is flat; Appendix Fig. 5.
BTP-7400 User’s Manual the print head module to lock status, wind the base paper on the rewinder tightly for 2-3 circles to complete the paper loading (refer to Appendix Fig. 5.1). Appendix 6 Guide for paper loading under label rewinding mode When using label paper with the full roll that has been printed, the user can set the paper output mode to rewinding mode.
BTP-7400 User’s Manual Appendix Fig.6.1 Appendix 7 Guide for paper loading under cutter mode When using label paper with single label that has been printed, the user can set the paper output mode to cutter mode.
BTP-7400 User’s Manual Appendix Fig. 7.1 Appendix 8 Menu on human-machine interface 1.COMMON SETTING 1.PRINT SPEED 203DPI:2-12 ips 300DPI:2-10 ips 2.DARKNESS (0-30) 3.SHIFT X (-999~+999 DOTS) 4.SHIFT Y (-99~+99 DOTS) 5.TEAROFF POS (-99~+99 DOTS) 2.SETUP 1.PRINTER SETUP 1.TRACKING MODE 1.CONTINUE PAPER 2.
BTP-7400 User’s Manual 3.LABEL PAPER 2. OPERATION MODE 1. REWIND 2. TEAR OFF 3. PEEL OFF 4. CUTTER 3. MEDIA TYPE 1. TEM DIRECT 2. TEM TRANSFER 4.PRINT WIDTH 203DPI: 832(DOTS) 300DPI: 1248(DOTS) 5. FEED SPEED 203DPI:2-12 ips 300DPI:2-10 ips 6.BACKFEEDSPEED 203DPI:2-12 ips 300DPI:2-10 ips 7.POWER ON 1. NO ACTION 2. PAPER FEEDING 3. CALIBRATION 8. PRESS DWON PRINT HEAD 1. NO ACTION 2. PAPER FEEDING 3.
BTP-7400 User’s Manual 9.PRINT SPEED 203DPI:2-12 ips 300DPI:2-10 ips 10.DARKNESS(0-30) 11.SHIFT X (-999-+999 DOTS) 12. SHIFT Y (-99-+99 DOTS) 13.TEAROFF POS(-99-+99 DOTS) 2.SENSOR 1.LIGHTINTENSITY 1.TRANSMISSENSOR 2.REFLECTSENSOR 3.RIBBONSENSOR 2.THRESHOLD 1.TRANS,CONTINU 2.TRANS,NONCONTINU 3.REFLECT,CONTINU 4.REFLECT,NONCONTINU 5.RIBBON 3.SENSER SELECT 1.REFLECTSENSOR 2.TRANSMISSENSOR 4.SENSER ADJ 1.TRANSMISSENSOR 2.REFLECTSENSOR 3.RIBBONSENSOR 3.
BTP-7400 User’s Manual 1.BUAD RATE 1.9600 2.110 3.300 4.600 5.1200 6.2400 7.4800 8.19200 9.38400 10.57600 11.115200 2.DATA BITS 1.7bits 2.8bits 3.STOP BIT(S) 1.1 BITS 2.2 BITS 4.PARITY 1.NOME 2.EVEN 3.ODD 5.HANDSHAKE 1.RTS/CTS 2.XON/XOFF 3.
BTP-7400 User’s Manual 4.IP NET 1.NET SELECTION 1.WIRED 2.WIRELESS 2. IP ADDRESS 3.SUBNET MASK 4. GATEWAY 5.PRNPORT 6. MAC ADDR 7.IP RESOLUTION 8.WIRELESS SET 1. ROUTER MODE 2. ACESS POINT MODE 9.WIRELESS STATUS) 5.LPT SETUP 1.LPT MODE 1.BYTE MODE 2.NIBBLE MODE 2.LPT ACK SETUP 1. DISABLE ACK 2. ENABLE ACK 6. DATETIME 1.DATE 2. TIME 7.DISTANCE SETUP 1.
BTP-7400 User’s Manual 2. TPH TO REFLECT 3 .TPH TO TEAR 4. TPH TO PEEL 5. TPH TO CUTTER 3.CALIBRATION 4.SELFTEST 5. MEDIA LIBRARY 1. MEDIA CALL 2. MEDIA STORAGE 3. DELETE ALL 4. DELETE THE SPECIFIED 5. UPDATE THE NUMBER 6.OFF LINE PRINT R:RAM E:FLASH B:SD CARD A:U DISK 7.SERVICE 1.FACTORY RESET 2. MILEAGE 3.SEQUNCENUM 4.PASSWORD 8.FILEOPERATE 1.UPGRADE 1.APP UPGRADE 2.
BTP-7400 User’s Manual 3.MAIN UPGRADE 4.EEP UPGRADE 5.ALL UPGRADE 2.DELETE 3.CUT 4.COPY 5.PASTE 6.CAPACITY 9. PRINT TEST 1.RUN DATA CATPTURE 2.EXIT DATA CATPTURE 3.RUN DUMP PRINT 4.EXIT DUMP PRINT 10. LANGUAGE ENGLISH SIMPLIFIED CHINESE Note: The above menu information is the configuration information V1.000 version, and the menu will be modified without further notice. Appendix 9 FCC statement This device complies with Part 15 of the FCC Rules.
BTP-7400 User’s Manual Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
