User Manual ModaMedia-W Followed description maybe different from the real device. Please keep the real device as the criterion. The telephone is subject to change without notice. In order to fully use this device please read this manual carefully.
We bring good things to Hospitality. Thank you for purchasing a Bittel product. The 5th Module: CORDLESS TELEPHONE MODULE Main Features: 1. High performance speakerphone 2. Wireless charging（Only support charging function） 3. Customized faceplate 4. Four guest service keys 5. Ultrabright message waiting indicator 6. Supports up to 4 additional handsets Base 2 1 3 8 4 5 1.Mic 3,4,8.Guest Service buttons 6.Message waiting indicator 6 7 2.Speaker 5. VOL 7.
Cordless Handset: 1 2 3 15 14 13 12 10 4 9 5 8 6 7 11 1. Receiver 4. Number Button 2. On Button 5. Guest Service 7.Mic 8.Charging Indicator 4. Power Port 7. Hold Button 5. Charging Base 8. Off Button 3. Volume6.Low Voltage & Ringing Indicator 9.Charging Connector Point 6. Volume + 9. Mute Button Operation 1. Off-Hook Press button of the handset or SPKR of the base will enter off-hook status. Press for twice will make the handset enter speaker mode. 2.
3. Make a Call Press button of the handset or SPKR of the base, then dial the telephone number. 4. Answer a call Please press the handset’s button or the base’s SPKR button or directly pick up the handset. 5. Hold Press HOLD button will enter hold mode, press release it. button will 6. Mute Press Mute btton will enter mote mode, press mute button again will release it. 7. The communication between the base and the handset 1) Press button will make the handset enter or get out of speaker mode.
The display will show Transmitting…, then Succeed. For the 3 guest service buttons of the base: Off-hook status, the 3 buttons are M1, M2 and M3 of the cloner; MWL is M0 of the cloner On-hook status, press each button for 5s, it will be M8,M9 and M10 of the cloner. MWL is M11 of the cloner. For the 3 guest service button of the handset: They are the M4, M5 and M6 of the cloenr.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
