User Manual For HWD9888(62)TSD-IP Please read this manual before use.
Product overview HWD9888(62)TSD-IP is 1 line SIP cordless phone, which is specially designed for top grade hotels’ telecommunication. It has clear sound, stable quality, powerful function and elegant design, etc. It’s also a kind of SIP phone which transmits voice over network based on IP protocol. Main Features 1. The Base and Handset can make/answer any calls freely. One Base can work with 1- 4 Handsets. 2. Supports SIP V2/SDP/RTP/RTCP/STUN/SNTP/ DNS/SNMPv2 protocols. 3. Supports IEEE802.
batteries. 2. For HWD9888(62)TSD-IP, please connect the phone handset cord 3. Power by POE: Connect the output end to the WAN port of the phone and connect the input end to the Internet cable from hotel edge switch POE port. 4. Power by adaptor (The default is POE) Please connect the 9V power adapter to the DC power input, which is in the rear of the phone; connect the Internet cable to WAN port of the phone, and connect the Internet cable to the LAN port of Data port/access point. 5.
1 1 4 2 ON 1 O FF 2 ABC 2 ABC 3 DEF 5 6 J KL MNO HO LD 7 8 9 PQ RS TUV WXYZ * 0 9 3 DEF 5 6 J KL MNO 7 PQ RS VO L+ VO L- HO LD 4 G HI 3 5 www.bittelphone.com 1 4 G HI MUTE 2 FLASH 6 2 8 9 TUV WXYZ * 0 # FLASH VO L+ MUTE VO L - SPKR LO W BATT # SPKR 3 IN USE 7 8 1.Service Keys 2.Function Keys 3.Number Keys 4. DC Jack 5. WAN Port 6.LAN Port 7. Message Waiting Light 8. Handset Jack 9. TO TEL Port Configure the phone through WEB Interface 1.
3. Launch WEB interface Input the obtained IP address to launch WEB interface . Type in user and password to log in WEB interface. Note: 1) Both the user name and password in initial management mode are ‘admin’. 2) The default network mode is DHCP. Once the phone is connected into the network environment with DHCP service, it can get online automatically 4. WEB interface function description 4.1 Phone status Product Information It shows the basic information of the product.
4.2 Network status Telephone can obtain IP address from DHCP server in default mode. Enter WEB interface to configure all related settings in accordance with real network environment. WAN IP Mode Select WAN port IP address obtainment modes including static/ DHCP/ PPPoE/ Bridge. MAC Address Clone Enable MAC address clone or not NAT Enable Activate NAT function or not.
Name , Phone Number, Account, Password. Basic Set basic information from VoIP service supplier,like phone number, account, password, SIP proxy, and etc. Audio Configuration Select audio format Supplementary Service Subscription Auxiliary function Call Waiting Enable call waiting or not Hot Line Set hot line MWI Enable Enable MWI or not Voice Mailbox Numbers Voice Mailbox server MWI Subscribe Enable Support MWI subscription 4.
4.6. WEB Operation Except regular configuration, please do not modify other corresponding information. 5. Voice Menu Instruction The phone has voice menu function; relevant information can be configured through voice menu. After starting the phone, press 4 times the * key to enter the voice menu. Hanging off can exit the voice menu.
Wan port subnet mask Gateway DNS After choosing key 3, the phone will broadcast current subnet mask; after the broadcast is finished, subnet mask can be set up. After choosing key 4, the phone will broadcast current gateway; after the broadcast is finished, gateway can be set up. After choosing key 5, the phone will broadcast current DNS; after the broadcast is finished, DNS can be set up. Submenu 2.1: Telephone number After choosing key 1, the phone will broadcast current phone number.
Press number key 2 if A, B, C, a, b, c is to be entered. Press number key 3 if D, E, F, d, e, f is to be entered. Press number key 4 if G, H, I, g, h, i is to be entered. Press number key 5 if J, K, L, j, k, l is to be entered. Press number key 6 if M, N, O, m, n, o is to be entered. Press number key 7 if P, Q, R, S, p, q, r, s is to be entered. Press number key 8 if T, U, V, t, u, v is to be entered. Press number key 9 if W, X, Y, Z, w, x, y, z is to be entered.
4. Service Button 1). Off-hook mode, press certain service key to dial the number directly. 2). How to Store: Keep the base in on-hook mode, press HOLD+ Desired number + Service key / MWL key. There will be indicating tone if succeed. For the handset, in on-hook mode, press HOLD + *+HOLD+N+M of the base (N=1,2 or 3, which stands for the location of the service button of the handset; M stands for the service button of base) .
2). Default mode: After on-hook, the last dialed number will disappear automatically within five minutes. 9.MWL Message Waiting Light When there is new message, the MWL will flash, press MWL key can retrieve the message 10. Handset call and speaker call and cordless handset call’s inter-converting 1).From handset call to Speaker call: Press SPKR key, then put the handset back 2). From Speaker call to Handset call: Press SPKR of the handset again. 3).
phone, the power level is 2 and the maximum value is 6.49W The power level of this type is 2. Simple failure diagnosis and troubleshooting Faults The phone doesn't work The phone can’t get IP Unable to login the WEB interface The radio has noise or no signal Speaker has no sound Phone works abnormally Solution 1. Please check whether the telephone power supply is connected properly 2. Check whether the switch port supports POE power supply 3. Check whether the Ethernet cable is plugged correctly. 1.
2) Unauthorized product repair or modifications have not been attempted. 3) The product has never been used in a harsh or corrosive environment. 4) No damage in transit THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS. THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. This warranty is only valid for merchandise purchased directly from Bittel or dealers or distributors Bittel Co. authorized. FCC Warning This device complies with part 15 of the FCC Rules.
try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.