User's Guide

M1使用说明书
规格：350*140mm 成品折叠后：70*70mm
M1
User guide
Remark:when touch the screen please
touch the place without numbers.
Touchable area
you need to connect the charging cable
for your first time use. Recharge to activate
the bottle and see the screen light up after
that it is activate successfully.
Step 1
If the bottle has been activated (charge once
is activated), click the APP to search for the
connect, then you can synchronize the
drinking data.
Step 2
1. Temperature Display
Red 61°C-99°COrange 37°C-60°CGreen 0°C-36°C
Click the lid, the screen&light strip will light up at same time.
screen show the current water temperature, light strip will display
green or orange or red colors when the water temperature change.
Tepmerature display have two unit options: Celsius °C and Fahrenheit °F.
For the switching method pls refer the figure 2of the APP.
Brand:
Model:
Capacity:
Battery:
Waterproof:
Display:
Charging:
Size:
Certification:
Sguai
M1
400/600ml
220mAh
IPX7
LCD
Megnatic charging
216x66mm/243x 70mm
FCC FDA CE Rohs
Specs
Warning
2. Remind Drinking
Cancel the alarm Set up alarm
Alarm set up: lid set up; APP set up.
Lid set up:
Lid set up have three options:1hour, 1.5hours, 2hours.
Single click to activate the screen.then double click the touchable
place on the lid.after you hear “d” voice the screen will show the
alarm icon and 1h word on the lid set up success,every 1 hour will
announce “d~d~d” sound to remind drinking.then double click the
screen second time, It will show switch to 1.5h reminding.third time
double click switch to 2h reminding.fourth time double click cancel
the alarm.
Alarm set up ,will cancel automaticly after 8 hours no touch.
APP set up: refer to the figure 2.
The battery symbol grid is moving
while charging.
Moving stopped after charging
complete.
3.Drinking data
4.Charging
5.Expired water reminder
When the water in the cup has not been drunk for
more than 8 hours (without touching the cup lid)
The display shows the "X" symbol, and the light is red.
Click lid, screen&light strip light up same time. Then
click again. Show the target drinking data percentage
(percentage=daily drinking/target drinking)
APP check: Refer to Figure 4
APP installation
For Android
BT support 4.0 or above
Android OS support android8.0 or above
For Iphone
BT support 4.0 or above
IOS support 10.0 or above
1.Connect the bottle
Sign in the APP Click "Water bottle" at the bottom bar.
Click to search for a bottle, click on the searched bottle
icon and connect success refer Figure 1
2.Set up
3. Health analysis
Click the icon to enter the bottle settings
Click the icon to enter the detailed drinking water data
Connect the bottle (1)
Figure 1
Local weather
Daliy drinking data
Display
current temperature
Setting data
Calculate drinking
water goals
Switch to check
the daily/weekly/monthly/year drinking data
Link or disconnect the water cup
Set up the drinking target
Switch the bottle alarm or APP alarm
Bottle screen lights up
Set up (2)
Figure 2
Set APP alarm reminder time
Switch ℃ or ℉
(Display of lid temperature)
Home (3)
Figure 3
Health analysis (4)
Figure 4
Every time adding or drinking,
Please cover the lid then wait for 10s to synchroize data
Smart bottle Manual
* Please read carefully before using
Details of materials for food contact
Name
Plastci
Metal
Bottle body
Temperature sensor
Food grade Tritan stainless steel (06Cr19Ni10)
GB4806.9-2016
Use
Lid
Sealing ring
Liner
Standard
Food gradePP ( Polypropylene) GB4806.7-2016
Food grade silicon GB4806.11-2016
Food grade Ceramic paint GB4806.10-2016
Silicon
Coating
1. Do not expose to high temperature sunlight
2. Do not store carbonated drinks
3. Do not use to keep dairy products or baby food for a long time
(with bacteria multiplying danger)
4. Do not use heating equipment such as microwave ovens to heat the product
5. Do not use the dishwasher
6. When hot water is installed, please place the product out of the reach
of children to avoid Bruise/burn
7. Do not violently bump, so as not to cause deformation/breakage of the
cup body
8. Non-professionals do not open the lid for repair or replacement parts
9. Do not put too much boiling water to avoid boiling water overflow when
screwing on the lid
10. This product has passed the IPX7 waterproof rating test, you can rest
assured to wash, but the Electronic chip components built in cup lid are not
suitable for long-term soaking in water, and boiling in water is prohibited.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without restriction.