USER MANUAL Title: SWH - Grain Condition Monitoring Device - Installation and configuration Manual Summary: Installation and configuration Manual of Grain Condition Monitoring Device 1/(10) Prod. # Doc. # Rev: Date: Author: Review: 010102 03 C 02/09/2022 SMV TITLE SWH - Grain Condition Monitoring Device - Installation and configuration Manual. SUMMARY Installation and configuration Manual of Grain Condition Monitoring Device.
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 2/(10) Date 02/09/2022 Author SMV INDEX TITLE ........................................................................................................................................................................... 1 SUMMARY ..................................................................................................................................................................
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 3/(10) Date 02/09/2022 Author SMV 1 PRODUCT INTRODUCTION Grain Condition Monitoring Device v3 is capable of monitoring critical parameters in grain warehouses, such as: air temperature/humidity, air quality and stored grain temperature/moisture. All data obtained is sent to a web platform via LoRaWAN technology. The whole device is shown in following figure: 1.
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 4/(10) Date 02/09/2022 Author SMV 2 QUICK START GUIDE The main steps are listed for quick use. Please refer to the following sections for more details. 2.1 INSTALLATION To carry out the installation of the device, perform the following steps. 1. 2. 3. Checklist Unpack the package, check the list of devices, and check whether there are any omissions.
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 5/(10) Date 02/09/2022 Author SMV 2.2 CONFIGURATION The device is already configured so it is not need it to carry out the configuration. For further information, please check section 4 of the manual. 3 LORAWAN SENSOR INSTALLATION In this section, the installation process of the device is explained. Before installing, please check the part list to ensure nothing is missing. 3.
Prod. # 010102 - Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 6/(10) Date 02/09/2022 Author SMV The device covers an area of 8m of diameter and 350 Tons of grain: 4 LORAWAN SENSOR CONFIGURATION In this section, the configuration of the device is explained. 4.1 DEFAULT CONFIGURATION After powering the device, the led will light up in all possible combinations.
Prod. # 010102 Doc. # 03 Rev C • • • • REGION_KR920 → 06 REGION_IN865 → 07 REGION_US915 → 08 REGION_RU864 → 09 4. Change keys SWH - Grain Condition Monitoring Device - Installation and configuration Manual 7/(10) Date 02/09/2022 Author SMV To modify ABP or OTAA keys send 1 byte with activation mode 01 or 02 respectively and then 16+16 bytes according to the table on Port 7. 5. Change JoinEUI To modify JoinEUI send 8 bytes with the new value on Port 8. 6.
Prod. # 010102 5.2 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 8/(10) Date 02/09/2022 Author SMV BATTERY CHANGE To perform the battery change, you need to unscrew 6 corners of the case of MTU. Then you can replace directly the 3 x AA batteries inside the case with standard AA commercial batteries. Screw again the case, assuring the correct assembly of all parts and check all the screws are properly tightened.
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 9/(10) Date 02/09/2022 Author SMV 7 CERTIFICATIONS 7.1 CE The product is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC) and the 2002/95/CE Directive. The product is in conformity with the following standards and/or other normative documents: - - Electro-Magnetic Compatibility: - UNE-EN 61326-1. Spectrum: - EN 300 220-1.
Prod. # 010102 Doc. # 03 Rev C SWH - Grain Condition Monitoring Device - Installation and configuration Manual 10/(10) Date 02/09/2022 Author SMV • SGS will not be responsible for any malfunctions caused by using the device with any batteries, power supplies or chargers other than those supplied by SGS. • Keep the device within the range of temperatures stated in the specifications section. • Do not connect or power the device with damaged cables or batteries.