Anchor Vista DirectFive Reference node for Real Time Location System Anchor User Manual User Manual rev0.2 EN Anchor Vista, reference node for real time location system Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.
Technical Parameters Anchor User Manual Size Weight Power Supply Power Requirements Operating Conditions Warm-up Time Environment Use UWB Radiated Power (CH5) 6240 – 6739.2 MHz 212 x 190 x 36 390 g PoE 802.3af 2.5W -20 - 60 °C 20 – 85% humidity Immediate Household environment Retail Building / Offices Automotive, Industrial Machinery Indoor only -41.3 dBm/MHz Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.
Power-Up Power Over Ethernet Anchor User Manual Please connect Anchor to network switch supporting PoE IEEE 802.3af standard and connect anchor with shielded Ethernet cable (CAT6 or higher). Maximum cable length is 100 m for PoE from anchor to PoE switch. Once the Anchor is connected to a stable power supply, a blue LED blink several times that indicates the anchor was turned ON. Then LED is turned OFF.
Fixed Anchor placement on a wall Anchor User Manual Holder: Mikrotik quickMOUNT PRO LHG Holder: Mikrotik quickMOUNT PRO LHG + metal console Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.
Anchor User Manual Mobile Anchor placement on a tripod For correct Anchor deployment please follow the official documentation page available at https://docs.sewio.net, Safety Instructions Anchor Vista DirectFive does not contain any user-serviceable parts and is not allowed to be opened by unauthorized personnel! Opening the screws of the device housing will invalidate any warranty claims.
Anchor User Manual Precautions: -Do not use deformed or damaged product or battery. -Do not expose the devices to extreme heat, pressure or humidity. -Do not charge or use the product if liquid has entered. -Do not use or store the devices in dusty or dirty areas. -Protect the product from excessive moisture. -Do not expose the devices to water, rain, splashing water or spilled drinks. -Do not spray anything on and inside the device.
Anchor User Manual Host to Anchor Connection Setting up and operating the Anchor is done exclusively via RTLS Studio software. RTLS Studio software is available through Sewio partner portal. For more information please follow the official documentation page available at https://docs.sewio.net. Regulatory Information For FCC compliance, the following conditions must be met: • All units must be exclusively used indoors. • No devices may be installed at any outdoor locations.
Any changes or modifications that have not been expressly agreed to by the Sewio Networks s.r.o could invalidate the user's authority to use the equipment Anchor User Manual DISCLAIMER The information contained within this document is subject to change without prior notice. Sewio Networks s.r.
