Mid-Back Air™ Chair Silla Gerencia Aire Assembly Instructions Instrucciones de Ensamblaje Model/ Modelo: 44103
Parts/Partes A Casters Ruedas Quantity/cantidad: 5 B Star Base Base en forma de estrella Quantity/cantidad: 1 E1 E2 Left Arm Brazo izquierdo Right Arm Brazo derecho Quantity/cantidad: 1 Quantity/cantidad: 1 C Gas Lift with Telescoping Cover Elevador neumático y cubierta telescópica Quantity/cantidad: 1 F Seat Cushion Cojín del asiento Quantity/cantidad: 1 D Seat Plate Mecanismo del asiento Quantity/cantidad: 1 G Back Cushion Cojín del respaldo Quantity/cantidad: 1 Chair Assembly Instructions Ca
H I 1-7/8” Big Screws Tornillos grandes de 48mm Quantity/cantidad: 2 1” Big Screws Tornillos grandes de 25mm J 1-1/4” Small Screws Tornillos pequeños de 32mm Quantity/cantidad: 12 Quantity/cantidad: 2 L K 1-1/4” Big Screws Tornillos grandes de 32mm Quantity/cantidad: 4 Allen Key Llave allen Quantity/cantidad: 1 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B).
L J L J D1 D2 D D D F Step 3 Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with the front of the seat plate facing the front of seat cushion). Attach by using 1-7/8” Big Screws (H) for the front holes of the Seat Plate (D) and 1” Big Screws (I) for the rear holes of the Seat Plate (D) with the Allen Key (L). *Note: Align the Seat Plate so the FRONT on the seat plate matches the FRONT label on the bottom of the seat cushion. Tighten the screws completely.
L J J FRONT FRONT FRONT RR FRONT FRONT FRONT L R FRFRONON TT LL F F G L K Step 5 Attach the Arms (E1 & E2) to the bottom of the Seat Cushion (F) by using 1-1/4” Small Screws (J) in the arm holes with the Allen Key (L). * Note: Align the arms so the FRONT on the arms matches the FRONT label on the bottom of the seat cushion. Tighten the screws completely. Step 6 Align Back Cushion (G) with Seat Cushion (F) by positioning the back support plate over the Seat Plate (D) with 1-1/4” Big Screws (K).
Y Pull out........ 6 Step 7 Position the assembled chair upright with the Seat Plate (D) facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D) and press down until fully engaged. Step 8 *Note: Remove the Packing Material (Y) placed between the back cushion and the air frame. Paso 7 Coloque la silla ensamblada verticalmente, con la plancha del asiento (D) hacia abajo.
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position.
Function Instruction - 3 To Operate Tilt Lockout: While seated, reach under the left side of the chair to find the handle. Push down the handle and lean back to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and pull the handle to the up position. Instrucciones de Funcionamiento - 3 Para operar el seguro de la inclinación: Cuando esté sentado, busque la palanca debajo del costado izquierdo de la silla.
Function Instruction - 5 About the breathability of the Air Lumbar Cushion: While seated, the open-air contours of the cushion which is designed to breathe and flex, can dynamically provide continuous support by connecting with your body’s natural movement. The air cushion conforms to the curve of your spinal cord and is intended to relieve your back from stress. *Note: It is not intended to diagnose, treat, cure or prevent any disease. If pain increases, please discontinue use.
Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así demostrado por el recibo original. Esta garantía no le aplica a muebles usados comprados “como tales”.
