FINGERPRINT-ENABLED ELECTRONIC SAFE USER MANUAL Models: SLSFE18FP | SLSFE24FP
DIAGRAM ! Please do not keep emergency keys in your safe! FUNCTION • • • • • • • • Locks: using high-quality anti-drilling locking bolts, high-theft proof performance.
PREPARATION • The safe on delivery comes with no registered fingerprints. • The safe is not loaded with batteries, you may insert the emergency key into the emergency keyhole to open the door . • Uncover the battery compartment cover at the back of door. And put in 4 X AA batteries. Please pay attention to the polarity of the batteries. For normal use, the batteries last up to one year.
SET USER CODE • Fingerprint unlock: Press unlock key, the red light at finger collector screen is on. Don't remove any fingerprint registered at finger collector screen until the red light off. After hearing a long "Bleep", the green light shinning, motor drives. Please turn the knob clockwise, then unlock succeed. • Password unlock: Input code (4 to 8 digits) and press unlock key to confirm. After hearing a long "Bleep", the green light shinning, motor drives.
SYSTEM INITIALIZATION/DELETION Press the Initialization/Add key for around 5 seconds, the green indicator light will blink about 12 times. Let go of the key when it stops blinking. After hearing a long "tick", all fingerprints records in the module will be eliminated and return to factory setting. IMPORTANT NOTES • Do not use liquid or a sprayer to clean the safe. Use a wet cloth instead.