BC950 LTE Battery Camera Setup Guide Copyright 2018. All Rights Reserved. Document Version: 1.
Table of Contents Chapter 1 Introduction .......................................................................................................... 1 Overview ............................................................................................................................ 1 Package Contents .............................................................................................................. 2 Chapter 2 Setup ................................................................................
Chapter 1 Introduction 1 This Chapter provides details of the LTE Battery Camera's features, components and capabilities. Overview This LTE Battery Camera that includes built-in LTE, which is designed for use in locations that need to be monitored but don’t have power or Wi-Fi, like a construction site. That means it’s powered by a rechargeable battery. The camera can be set up and controlled from your smartphone or device with the OVU app.
Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. 2. 3. 4. 5. 6. 7.
Chapter 2 Setup This Chapter provides details on how to install and configure the LTE Battery Camera. 2 System Requirements 1 A mobile device with Internet access • iOS based Smart Phone • Android based Smart Phone • Minimum OS Requirement: iOS 9.0 or later version Android 6.0 or later version 2 3 An activated SIM card with a data plan 2.1 Confirm APN of your SIM 2.
The camera is receiving a firmware upgrade. Blinking Green/Blue Front Panel Microphone The built-in microphone is useful for bi-direction voice conversation. PIR Sensor This is hardware sensor to detect motion Light Sensor This is hardware sensor to detect LUX. Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remains clean. The image quality is degraded if the lens cover is dirty or smudged.
Rear Panel Micro-USB Connector This connector is used for charging the power. Connect the supplied Micro-USB cable to this port. Top Panel Sync./Reset This button has two functions: Pairing - When the green LED is flashing slowly, press the button until the green LED is flashing rapidly. And then use the Ovu app to scan the QR code.
Physical Details - Battery charging station LED Color Status Battery Charging is on going Solid Amber Amber blinking three times, and then off Battery can’t be charged because battery level has been over 95%. (**Battery can be charged to 100% once battery level under 94%.
Pre-Installation The camera sends the videos to the account in the cloud via the mobile network. To do this, the user needs an activated SIM card installed in the camera. See the instruction from your service provider for more information about how to activate the SIM card. Please ensure SIM card and the battery are inserted into the camera before using the camera. Insert a SIM Card Please make sure that the SIM card is activated before using it. 1. Pull the battery cover up and then open the compartment.
Installation Please refer to Chapter 3 to know Ovu app installation first from Page.12. Use the Ovu app and your account to set up your camera. If you already set up an account, you can add the camera to your account. During setup, the camera must be connected to the mobile network. This requires that you are using the camera that is with an activated mobile service plan. After you add your camera to your account, you can place the camera anywhere in your mobile network coverage area. 1.
6. Read and follow the on-line instructions. Press "NEXT". 7. 8. Press the Sync button on the camera. Read and follow the on-line instructions.
9. Let the App scan the QR code on the camera with an appropriate distance. Be sure to hold the cell phone steady while scanning the QR code.
10. The pairing is in process and it may take a while to connect the camera to the cloud server. 11. Enter desired names for the camera and zone in the following screen. Then press "DONE".
Mounting Installation Place the camera in a flat surface or mount it on the wall/ceiling. For best results, we recommend to locate the camera in a location where the Ovu app displays at least three bars of mobile network signal strength. Check the mobile network signal strength in the place where you want to locate the camera. Avoid placing the camera in an area that gets a lot of light directly into the camera lens. Wall Mounting 1. Identify the location for mounting the Wireless IP Camera.
Chapter 3 Ovu App 3 This Chapter describes how to use the Ovu App to get the access to the camera system. Overview This Ovu app can help you to get more from your surveillance system. With this easy to use app, now it's simple to be in control, get alerts and watch videos in the palm of your hand. Note: Features may differ according to camera models. OVU Application Installation Ovu App is now available for FREE download on Apple and Android store.
4. Click the following link to trust the App. 5. Once installed, tap the ″Ovu″ app icon from your screen to open it.
Account Registration Simple setup is required only for the first time you launch the App. If you access the Mobile App for the first time, you will be asked for account registration: 1. Press the "Ovu" icon in the desktop. 2. Click "SING UP". 3. Enter the email address, password and confirm password in the following screen. Then press the "SING UP" button.
5. When the app launched, enter the e-mail address and password. Then tap "SIGN IN" to login. 6. The following sample screen will be displayed when you logged in successfully. Note: The user needs to tab the added. icon to add a camera if the camera intended to use is not 7. The user can follow Chapter2 Set up to know the instruction on the App screen to add a new IP CAM for use.
Forget Password 1. Press "FORGET PASSWORD" in the login screen, 2. Enter the email address. 3. Press "RE-SENDING EMAIL" button. 4. Click "OK". 5. You will receive an email in your email box. Click on a link in the email and follow the instructions to reset the password.
Camera Settings The camera screen will display the still picture of the added camera (updated every 10 minutes). The camera name is displayed in the upper right corner. The setting button is located in the upper left corner. Other information like camera location, battery status, WIFI signal and Share button are located in the lower edge. The user can press the camera picture to enter the corresponding camera live video screen if desired.
Deleting BC950 1. Press icon of the selected camera in the screen. 2. Press "REMOVE THE CAMERA" button in Camera Settings screen. Note: AFTER REMOVING THE CAMERA, THE USER NEEDS TO RESET THE CAMERA TO DEFAULT FACTORY SETTINGS BEFORE RE-ADDING TO THE ACCOUNT AGAIN. Hold down the "RESET" button of the camera for more than 10 seconds until the LED lights up.
3. All related videos are deleted after camera is removed. Camera Settings Press icon of the selected camera to go to the Camera Settings screen.
Settings (settings may differ according to camera models) General Camera Name Enter the name of the camera. Voice On/Off Use this to turn on/off the voice. Camera Location Enter the location of the camera. Camera Information The following information will be displayed: Networking Status - It shows the current status of the WIFI connection. MAC Address - The MAC address is displayed. Firmware Version - It displays the current firmware version.
Active Settings Press Schedule to go to the Active Settings screen. Motion Detection - Turn this on if you want to get notifications when motion is detected. Audio Detection - You will get an event notification if there is a sound detection. Push Notification -You will get an event notification if this is enabled. Email to Share Account - If this function is enabled, you and the shared account will get an email notification when there is an event detection.
Firmware Upgrade There are generally two ways to update the firmware: automatic updates or manual updates. Automatic Updates 1. 2. Press icon of the selected camera to go to the Camera Settings screen Tap CAMERA INFORMATION. 3. Enable "Auto Firmware Update" option. After turning the option on, the firmware updates will roll out to the devices automatically.
Manual Updates 1. 2. 3. Press icon of the selected camera to go to the Camera Settings screen Tap CAMERA INFORMATION. Scroll down and check the firmware version. If you see new update instead, your device has new firmware available. Tap UPDATE and follow the onscreen instructions to update the firmware. 4.
Chapter 4 Troubleshooting This chapter covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the LTE Battery Camera and some possible solutions to them. If you follow the suggested steps and the LTE Battery Camera still does not function properly, contact your dealer for further advice.
A Appendix A Specifications LTE Battery Camera Model LTE Battery Camera Dimensions (H x W x D) 80.8 mm *83 mm * 97.
Regulatory Approvals FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
P2-01 Battery Caution 28
