User's Manual

ManualsBrandsSequel Technologies ManualsElectronicsDoor/Window Sensor

Rhein Tech Laboratories, Inc. Client: Sequel Technologies, LLC

360 Herndon Parkway Model: STWS-DWS

Suite 1400 Standard: FCC 15.231

FCC ID: V4X-DWSX01 Herndon, VA 20170

http://www.rheintech.com

Report #: 2008038

Page 21 of 25

Appendix G: Manual

Please see the following pages.

Summary of content (4 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix G: Client: Model: Standard: FCC ID: Report #: Sequel Technologies, LLC STWS-DWS FCC 15.231 V4X-DWSX01 2008038 Manual Please see the following pages.
PAGE 2
Door/Window Sensor (DWS) Installation Instructions Sequel Technologies, LLC General Description The Wireless Door/Window Sensor (DWS) is a dual input door/window sensor developed for use with the ST security systems. The DWS can be tripped by using either of the two built in reed switches and/or in conjunction with a normally closed external contact.
PAGE 3
Programming The following instructions provide a guideline for programming the DWS into system memory. To enroll a DWS into system memory: 1. Enter program mode (NEXT + NEXT + NEXT + + Installer PIN) 2. The keypad will display “Devices Available.” Select . The display shows “Auto Enroll On.” 3. To enroll the DWS, trip the sensor as follows: • Using magnet only: Close either reed switch (restore the magnet) and remove the sensor cover.
PAGE 4
Specifications • Compatibility: All Sequel Technologies ST Security Systems (ST8 requires Expansion Transceiver Module) • Power: 3.0V CR123A, lithium battery (average battery life is 3-5 years) • Transmitting Frequency: 319.5 MHz and 345 MHz • Supervision Interval: 60 minutes • Transmit Range: 500 feet, open air • Sensor Dimensions: 4.31” x 1.09” x 1.16” (HxWxD) • Magnet Dimensions: 1.86” x .41” x .47” (HxWxD) • Material: High-impact ABS • Operating Temperature: -30° to 120°F (-34° to 49°C) • Max.