VZ20Q Evaluation Kit User Manual SEQUANS Communications 19 Le Parvis Batiment Citicenter 92073 Paris La Defense Cedex, France Phone. +33.1.70.72.16.00 Fax. +33.1.70.72.16.09 www.sequans.com contact@sequans.
Preface Legal Notices Copyright© 2013, SEQUANS Communications All information contained herein and disclosed by this document is confidential and the proprietary property of SEQUANS Communications, and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein.
Document Revision History Revision Date Product Application V1.0 First edition of the VZ20Q-EVK User Manual.
About this Document Purpose and Scope This user manual is intended for engineers who use the VZ20Q-EVK evaluation kit to run various qualification tests in Verizon environment. Who Should Read this User Manual This document is intended for engineers who want to operate the evaluation kit based on the VZ20Q-module, for IOT and certification tests purposes.
Table of Contents 1 VZ20Q-EVK PRODUCT DESCRIPTION ................................................. 6 1.1 PRODUCT FEATURES ............................................................................. 6 1.2 SOFTWARE DESCRIPTION ....................................................................... 6 2 INSTALLATION PROCEDURES ............................................................ 7 2.1 PREREQUISITES .................................................................................. 7 2.
1 VZ20Q-EVK Product Description 1.1 Product Features The aim of the SQN20Q-EVK is to demonstrate the features and performance of the VZ20Q module and Sequans’ solution. The VZ20Q-EVK is typically used as a test platform for conformance and certifications tests. The VZ20Q-EK Evaluation kit is delivered as a board to connect on a PC’s USB port. 1.2 Software Description The VZ20Q-EVK is a hostless device.
2 Installation Procedures 2.1 Prerequisites 2.1.1 Hardware Sequans’ module-based VZ20Q-EVK evaluation kit requires a Windows® PC, running Windows XP or Window7 with an USB 2.0 port. It can also be used with a computer running MAC OS or Linux. 2.1.2 Software Using a terminal emulator application (e.g Putty on windows), open the installed serial port @ 115200 bauds, 8 data bits, 1 stop bit, no parity and no flow control.
2.2 First Installation 2.2.1 Install the Host Software Without plugging in the device, launch the Windows installer. It automatically installs the Sequans’ VZ20Q drivers on the PC. Follow the procedure: 1. Launch the installer and confirm its execution. Click Yes button to start the installation process. 2. Click the Next> button. 3. Select the installation directory. The default directory can be changed by clicking the Browse... button. Click Next when the appropriate directory is selected. 4.
2.4 Firmware Upgrade 2.4.1 Upgrade Prerequisites The firmware upgrade process requires: • An operational VZ20Q-EVK board connected to a PC with USB • A web browser, launched and connected to the VZ20Q-EVK at http://192.128.15.1. • An upgrade package such as *.sfp. 2.4.2 Upgrade Execution Execute the following steps of the upgrade procedure. 1. Click on System tab. 2. Click on Backup / Flash Firmware item. 3.
3 General Procedures 3.1 Connect the VZ20Q-EVK For the first installation of the VZ20Q-EVK on the PC, please follow the procedure described in Section 2. There is no other specific operation required for the later connections. Plug the VZ20Q-EVK on a USB port of your PC and wait for the “Device ready” Windows message display. The VZ20Q-EVK is then ready. 3.2 Launch the WebUI Launch a web browser and connect to the following URL: http://192.168.15.1. 3.
4 FCC Regulations FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2AAGMVZ20Q”.
