Quick Reference Guide Quick Reference Guide DMR HAND-PORTABLE SBP8000 / SCP8000 / SEP8000 1
DMR Portable SBP8000, SCP8000, SEP8000 Contents General This guide covers the basic operation of the DMR Portable. Please refer to the DMR Portable user guide for more detailed information on using this product. Disclaimer notice Sepura‟s policy is to continually improve its products. The features and facilities described in this document were correct at publication, but are subject to change without notice. Contact Us Sepura plc.
Quick Reference Guide Safety Read these safety instructions carefully. Attention! Sepura terminals are designed for use by mobile workforces, often working alone, and are intended for use in occupational and controlled conditions. It is the responsibility of the person operating the product to ensure that it is operated safely at all times, and that local laws and regulations governing the usage of Radio Frequency (RF) products are observed.
DMR Portable SBP8000, SCP8000, SEP8000 Switch off the terminal in blasting areas. It may interfere with blasting equipment. Always obey signs relating to the usage of wireless devices and two-way radios in blasting areas. Safety when driving a vehicle Always obey local laws and regulations governing the operation of RF wireless devices when driving and whilst at locations. Do not operate the product if it creates a distraction from driving safely and observing road conditions.
Quick Reference Guide Regulatory Caring for your product Sepura declares that this product is complaint with the essential requirements and other relevant provisions of the European R&TTE directive 1999/5/EC relating to radio and telecommunications terminal equipment and the mutual recognition of their conformity. This product is also compliant with directive 2011/65/EU having been designed and manufactured to the RoHS requirements. The terminal does not require regular servicing.
DMR Portable SBP8000, SCP8000, SEP8000 IC RSS warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Quick Reference Guide 5
DMR Portable SBP8000, SCP8000, SEP8000 Connectors, controls, buttons and keys Keys, buttons and knobs overview Refer to the illustration for the location of the following connectors, controls, buttons and keys: (1) Antenna (2) Programmable side button1 (3) PTT button (4) Programmable side button 2 (5) Emergency/Programmable button (6) LCD display (7) Left context key (8) Left navigation button (9) Dial key (10) Speaker (11) Keypad (12) Channel selector knob (13) Power/volume knob (14) LED status indicato
Quick Reference Guide Status indicators and icons Icon Status indicators show the operational state of your terminal. Icons appear on your terminal display when you perform certain activities or activate certain features. Description USB connected Indicates that USB device is connected. General icons Signal and security icons Icon Icon Description Receiving Signal Strength Indicates the receiving signal strength. Bars indicate the strength of the signal. Maximum 4 bars indicate strongest signal.
DMR Portable SBP8000, SCP8000, SEP8000 Icon Description priority channel when the centre triangle is green. External Device connected Indicates that an external microphone or speaker is connected. Calls Icon The LEDs on the radio change colour to show the operational states of your terminal. LED Operational State Solid red In use and transmitting Solid green In use and receiving voice, short message or data.
Quick Reference Guide Battery information Your terminal is supplied with a Sepura battery to provide optimum performance .Optional single charger or six-way charger units are available. The following guidelines will help you get the best performance from your Sepura battery and help to ensure your safety. Caution! When recharging batteries, always ensure that the battery charger is placed in a well-ventilated area away from combustible materials.
DMR Portable SBP8000, SCP8000, SEP8000 Charging your battery Accessory information If the battery is new, it is important that it is fully charged before first use. Your terminal will sound an audible alert when the battery has less than 15% charge remaining. Typical charging time is approximately 3-4 hours. This may vary depending on the battery and environmental conditions. Charge your battery between 5 oC to 35 oC (41 oF to 95 oF) temperatures only.
Quick Reference Guide Attaching the antenna Basic operation Place the antenna into its receptacle. Turn the antenna clockwise until finger tight. Power On/Off To power on, rotate the Power/volume knob clockwise. To power off, rotate the Power/volume knob counter-clockwise until the knob clicks. Adjusting the volume Attaching the belt clip Ensure the terminal is switched off. Remove the two screws at the back of the terminal using the cross-head PH1 screwdriver.
DMR Portable SBP8000, SCP8000, SEP8000 You may need to select the channel before making the call. In the Home display, press the PTT button to initiate a call. Call a group or person from the contact list Press the right context key to activate the Contacts menu. Select the Contacts List option and then press the left context key to Confirm. Use the navigation keys to scroll through the list. With the contact group or person highlighted, press PTT button to initiate a call.
Sepura plc Radio House St Andrew‟s Road Cambridge CB4 1GR UK Tel: +44 (0)1223 876000 Fax: +44 (0)1223 879000 Sepura.
