User's Manual
Title : NO. : SCE-0205
Date : 14. JUN. 20
0
2.3 Operating summary
•
TRANSMITTER's button is pushed
•
TRANSMITTER sends appropriate CODE by RF frequency.
•
RECEIVER gets the code and decodes it.
•
When Rx proves it to be the right code, Rx drive the actuator
or carry out the alarm function.
2.3.1 LOCK & UNLOCK
If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
2.3.2 PANIC
If PANIC button is pushed, then transmitter sends the PANIC data.
2.4 Caution
•
Danger of explosion if battery is incorrectly replaced.
•
Replace onl
y
with the same or equivalent t
y
pe recommended b
y
the manufacture
•
Dispose of used batteries according to the manufacturer's instructions.
Information Document
Information Document