INFORMATION DOCUMENT RELATING TO CE TYPE-APPROVAL AS SEPARATE TECHNICAL UNIT OF VEHICLE RF REMOTE KEYLESS ENTRY IN ATAS SYSTEM DaeDong CO., LTD. - 2013.02.
Title : NO. Information Document 1. GENERAL 1.1. Make Date DaeDong Co.,Ltd. 1.2. Model No. - Transmitter : DD4TX1306-TFL 1.3. Name and address of manufacturer DaeDong Co.,Ltd. 734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea. 1.4. Address of assembly plant DaeDong Co.,Ltd. 734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.
Title : NO. Information Document Date 2. PRODUCT SPECIFICATION 2.1 TF F/L 4B Folding Transmitter 2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.2 SPECIFICATIONS 2.2.1 TRANSMITTER ITEM SPECIFICATION Rated supply voltage DC 3V Operating voltage range DC 2.5 ~ 3.
Title : NO. Information Document Date 2.3 Operating summary ① TRANSMITTER's button is pushed. ② TRANSMITTER sends the code by radio frequency. ③ RECEIVER gets the code and decodes it. ④ RECEIVER judges the code whether it is right code or not. ⑤ RECEIVER checks door lock or unlock, trunk state. ⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.
Title : NO. Information Document Date 3. USER MANUAL 3.1 NAME : BCM system - This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or TRUNK in vehicle. - This BCM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Body Control Module. *RKE : Remote Keyless Entry. 3.2 SYSTEM CONSTRUCTION 3.2.1 SYSTEM IN VEHICLE ANTENNA BATTERY ROLLI NG CODE RECEI VER 3.2.