SWU – 3120 User Guide WiMax USB Modem/WCM
1. For your safety 1 2. Before using Modem 3 3. Basic usage 5 3.1 Inspect Package Contents 5 3.2 Parts Description 5 3.3 How to use UICC 5 4. Software Installation 6 4.1 WCM Program Installation 8 4.2 Verification 12 5. How to use WCM 10 5.1 Running WCM 13 5.2 Display Window 14 5.3 WiMAX Connection 23 5.4 WiMAX disconnection 24 5.5 WiMAX exit 25 6. Product Specification 22 7.
1.For your safety Read this simple guideline. Ignoring guideline may cause device from working properly and cause damage to device. Do not use near BLASTING Follow any restrictions. Do not use the device where blasting is in progress. Do not use in hospitals - Follow any restrictions. Switch the device off near medical equipment Do not use in aircraft. Follow any restrictions. Wireless devices can cause interference in aircraft.
1.For your safety Read this simple guideline with reference to the previous page. Do not store the device in hot areas High temperature can warp or melt certain plastics and shorten the life of electronic devices. Do not store the device in cold areas When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
2.Before using Modem System Requirements CPU & memory Interface Supported OS Pentium ⅣProcessor or faster, 128MB RAM or more USB 2.0 Windows /XP/Vista(32Bit) Insert UICC correctly. If you insert it inversely, card slot may be damaged. Do not force the SIM into the SIM slot. When internet is connected, don’t remove UICC. The modem & UICC may incur problems and not work properly.
2.
3.Basic Usage 3.1 Inspect Package Contents 3.
4. Driver Installation If you have previous WCM or Driver version, uninstall it first. Plug USB Dongle into your USB port. Double Click [GdmSetup_WiBro_W2_v2.
4.
4.
4.
4.
4.
4. Driver Installation Click [Finish] button. Restart your PC.
4.
4.
4.
4.
4. Driver Installation USB Dongle을 제거합니다. [gdmuimg.exe] 을 클릭하여 실행합니다. [Install]을 선택하여 실행합니다.
4. Driver Installation Confirm file replace화면에서 [Yes to All] 을 클릭합니다.
4. Driver Installation Verification Plug USB Dongle into your USB port If GCT Wibro USB Network Device is connected on Device Manager screen, it’s installed normally.
5. How to use WCM 5.
5. How to use WCM After driver installation, the system detects the GCT WiBro modem on its attachment. The WCM is launched by running WCM.exe. If the Wibro modem is not attached, the WCM prints messages that it cannot find WiMax device. (Figure 1) After WiBro modem is attached, the WCM detects the modem device successfully and performs initialization procedure.
5. How to use WCM Connected The WCM allows user to start network-entry by activating “Connect” button. . Status : User can monitor the network status in more detail. Setting User can configure the global operation of WiBro at the “Setting” menu of the WCM. .
5. How to use WCM 5.2 Setting Mode(Use PKM) : Authentication mode is used. - PKM Type * EAP-AKA : S/W EAP-AKA without USIM card * EAP-AKA(Use USIM) : EAP-AKA using USIM * EAP-MD5 : Use EAP-MD5 * EAP-TTLS(MSCHAPV2) : Use MSCHAPV2 Auto Connection : WCM initiates network entry automatically Manual Connection : Network entry is controlled manually All settings becomes effective after “Save” button is pressed.
5. How to use WCM 5.3 Debug Screen TX Power : User can control TX Power. FA Sel : User can select Frequency.
6. Product Specification Air Interface IEEE 802.16e Frequency Band 2.50 GHz Frequency Accuracy ± 100 Hz Size 54(W) x 31(H) x 15.
7. Service Center A/S field Please inform us product model name and problem status when you inquire.
Quality Warranty Model Purchase Date SWU-3120 20 . . Name Address . Telethis device Purchase Place Serial Number Gratuitous Service Seowon intech guarantees this product against defects in materials and workmanship for a period of one year from original date of purchase. Compensatory Service In case of not defect - If you request the service in case of not defect, you have to pay a charge so please make sure to read the user manual first.
RF EXPOSURE INFORMATION Your WIMAX USB Modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
