User's Manual

ManualsBrandsSEONG JI INDUSTRIAL ManualsElectronicsBluetooth Module

Version 1.0

SEONG JI

page 1 of 6

User manual of BTM530A

1. Introduction

BTM530A is Bluetooth 4.2 products, including embedded UART interface optimized for Mac and

compatible radio / low-power applications

The core chipset is from Qualcomm, part number CSR8811A12.

2. Hardware Architecture:

2.1 Main Chipset Information

Item

Vendor

Part Number

Bluetooth 4.2

mac/baseband/radio

Qualcomm

CSR8811A12

2.2 Circuit Block Diagram

The major internal and external block diagram of BTM530A is illustrated in Figure 1-1.

Figure 1-1 BTM530A block diagram and System Interface

Summary of content (6 pages)

PAGE 1
User manual of BTM530A 1. Introduction BTM530A is Bluetooth 4.2 products, including embedded UART interface optimized for Mac and compatible radio / low-power applications The core chipset is from Qualcomm, part number CSR8811A12. 2. Hardware Architecture: 2.1 Main Chipset Information Item Bluetooth 4.2 mac/baseband/radio Vendor Part Number Qualcomm CSR8811A12 2.2 Circuit Block Diagram The major internal and external block diagram of BTM530A is illustrated in Figure 1-1.
PAGE 2
3. Operational Description It is mounted in the sound-bar communication controller for using a wireless device user the Bluetooth devices that act. Channel based on the 802.15.1 / 1a of the Bluetooth standard IEEE 79 channels and frequency use the 2402MHz ~ 2480MHz band and channel interval is 1 MHz. - Features >Bluetooth 4.2 >Full-speed Bluetooth operation with full piconet and scatternet support >High-sensitivity Bluetooth receiver >On-chip balun > Support for IEEE 802 ® .
PAGE 3
- Product Specifications > Standards: Bluetooth 4.2 > Data Modulation GFSK, 8DPSK > Frequency Range 2402-2480MHz > Module power output Parameter Min Typ. Max Unit 2.402 - 2.480 GHz 4.0 7.0 9.99 dBm - - -35 dBm -75 - 75 KHz - - 0.1 % - - 0.1 % RF Characteristics RF Frequency Range Output power [TRM/CA/01/C] class1(0.25~10mW) TX Spurious Emission 30.0MHz to 1.0GHz 1.0GHz to 12.5GHz 1.8GHz to 1.9GHz 5.15GHz to 5.
PAGE 4
. Notice Approval Statement CE Statement Contact Address: SEONG JI INDUSTRIAL CO., LTD, / 54-33, Dongtanhana 1-gil, Gyeonggi-do Hwaseong-si South Korea FCC approval This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation.
PAGE 5
IC approval This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s).
PAGE 6
NCC Statement 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Version 1.