5GHz Wireless Audio Transceiver ATM511 DATASHEET REV01 DEC 15, 2021 SEONG JI INDUSTRIAL CO.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 Table of Contents 1. Revision History .......................................................................................................................................................... 3 2. Scope .......................................................................................................................................................................... 4 3. Product Information ...............................................
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 1. Revision History No.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 2. Scope This document is the specifications of 5GHz wireless audio transceiver module, ATM511. 3. Product Information 3-1. Product Information ITEMS DESCRIPTION Manufacturer Customer Customer Project Product Application Product Name Part Number SEONG JI INDUSTRIAL CO,.LTD Wireless Audio Transceiver ATM511 TX : WSATM511A00 RX : WSATM511A10 Regulatory Certification FCC IC CE 2AS8LATM510 25119-ATM510 TBD SSB TX : 2.0.15 RX : 2.0.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 3-3. Lot Number A A F L N 5 1 0 1 (1) (2) (3) (4) (5) (6) (7) (8) (9) No.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 4. Operating Description The SKY76303 SoC has the VMI RF protocol, providing an excellent coexistence performance and also provide the capabilities of world-class wireless audio protocol by supporting increased digital I/O and OTA (over-the air) signal routing flexibility to accommodate a wide range of wireless audio application.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 The 16MHz crystal oscillator generates the SKY76303 IC fundamental system clock used as the basis for all RF and digital audio clocks. The 4Mb flash memory chip is used to store the module’s application firmware. The SKY76303 is able to boot from internal ROM upon first power up, which enables programming the flash chip with the application firmware through USB.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 There are two available I2S digital audio data inputs/outputs, each of these can be configured to operate as either a master or a slave – depending on the application, the I2S ports can operate simultaneously as either inputs or outputs. When configured as slaves, the I2S inputs/outputs can be independently clocked by up to two external masters.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 5. Product Information 5-1. Absolute Maximum Ratings Absolute Maximum Ratings (AMR) are stress ratings only. AMR corresponds to the maximum value that can be applied without leading to instantaneous or very short-term unrecoverable hard failure (destructive breakdown). Stresses beyond those listed under AMR may cause permanent damage to the device.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 Continuous RX 73 Linked status for RX 62 Searching for RX 72 0.6 Input Voltage Logic Low, VIL CMOS I/O Logic Levels – VDDIO 3.3V Input Voltage Logic High, VIH VDDIO 0.6V V 0.3 Output Voltage Logic Low, VOL Output Voltage Logic High, VOH VDDIO 0.3V 5-4. Electrical Characteristics – RF TX Operating Conditions: TA = 0°C to +70 °C, RF Freq = 5150~5250/5725‐5875MHz, measured to the RF Radiated Antenna 2 ports.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 5-5. Electrical Characteristics – RF RX Operating Conditions: TA = 0°C to +70 °C, RF Freq = 5150~5250/5725‐5875MHz, measured to the RF conducted 2 ports. Typical specifications at TA = 25°C, VDD = 3.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 5-8. I2S Communication Interface Timing I2S Interface Timing PARAMETER MIN TYP MAX UNIT VL Low voltage level -0.3 0 0.4 V VL High voltage level 2.7 3.3 3.6 V T Clock period 325.5 ns TLO Clock low period 0.4T 0.6T THI Clock high period 0.4T 0.6T TR Rise time 50 ns TF Fall time 50 ns TSu Setup time 25 ns THd Hold time 25 ns TOd Output delay -25 Bit clocks/Word clock 25 Notes 1/3.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 5-9. I2C Slave Communication Interface Timing I2C Slave Interface Timing (Fast-Mode) Parameter MIN MAX UNIT VIL Low level input voltage 0.3 0.6 V VIH High level input voltage 2.7 3.6 V 0 0.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 6.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 7. Mechanical Specifications 7-1. Module dimension 7-2.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 8. Label Specification Notice] The label specifications described as below are an example. The Part number, firmware version and color will be changed by customer 8-1. Label Information Descriptions 8-2.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 9. Certificate Statement FCC & IC Statement This WIRELESS AUDIO TRANSCEIVER has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 Device Classifications Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission, and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 OEM Instruction Manual Content Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product (OEM-specific content is displayed in italics.) Operating Requirements and Conditions: The design of ATM511 complies with U.S. Federal Communications Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.
PBA RF Module ATM511 5GHz Wireless Audio Transceiver REV: 01 Information Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
