User manual Model LS140L
Content 1 GENERAL INFORMATION 1.1 INTRODUCTION 1.2 SAFETY WARNINGS 1.3 PRECAUTIONS 2 YOUR PHONE 2.1 GENERAL DESCRIPTION OF THE PHONE 2.2 FUNCTIONS OF THE KEYS 2.3 MAIN MENU 2.4 ICONS 3 FIRST STEPS 3.1 SIM CARD INSTALLATION 3.2 CHARGING THE BATTERY 3.3 INSTALLING THE ANTENNA 3.4 RJ-11 CONNECTION (6 POINTS) CABLE 3.5 ASSEMBLING THE TELEPHONE BASE 3.6 USE OF THE TELEPHONE 3.7 CONNECTION TO WI-FI NETWORKS 3.8 CONNECTING TO BLUETOOTH DEVICES 3.9 CONNECTING TO A COMPUTER VIA USB 3.10 CLARO IDEAS PORTAL 4 CALLS 4.
1. General Information 1.1 Introduction Please read this manual carefully to keep your phone in perfect condition. It is important to familiarize yourself with the operation in its entirety to ensure proper use and best result. Senwa Mobile is not responsible for inappropriate use of the phone. Senwa Mobile may change the device without prior written notice and reserves the right to interpret the performance of the phone.
dangerous in any way. MEDICAL EQUIPMENTS Use the phone with caution near medical devices, such as pacemakers, hearing aids, and other electronic medical devices, as the phone may cause interference in these types of equipment. INTERFERENCES The quality of conversation on any mobile device can be affected by radio interference. Inside the phone, there is an antenna located on top of the phone; Do not touch the antenna area during a conversation to avoid possible deterioration in sound quality.
Do not place the phone or its accessories in the expansion area of the car air bags; doing so could injure you if the air bag system is activated. TAKE CARE OF YOUR HEARING CAPACITY AND YOUR VISION When using the headset, be sure to adjust the volume carefully, avoiding listening to music at a volume that is too high as it may damage your hearing. Also, do not place the screen of your phone too close to your eyes and try to keep any lights on in the environment while using it. 1.
1 Handle connection 2 charging 11 Direct access key: access to the previous block function antenna 12 Support frame back cover 3 display screen 13 Hanging area 4 Navigation key 14 Battery area 5 Left function selection key: enter the menu to confirm 15 Handle earpiece area 6 Right function selection key: enter call log/return 16 Handle charging connection 7 Dial key: dial/into call log 17 Handle display area 8 Power button: power on/off 18 Handle button area 9 Number keys a
2.2 Key functions The phone contains the following keys: On / off key The power key is located on the right side of the keyboard. Press once to turn off the screen and lock the phone after use. If you press and hold the key, the phone will turn off. Call key The call key is located on the left side of the keyboard. Press once to view call logs. Select keys The selection keys are located on the upper left side and the upper right side of the keyboard. Press the left selection key to access the Menu.
Mi Telcel Calculator File Explorer Settings Browser Chat Multimedia SIM Telcel Tools Messaging History Contacts Note: The appearance of the application icons may vary when updating the software. 2.
You will find a series of icons that indicate the status of your phone. 3First Steps 3.
A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), network information, contact information, and short message information. You will need an active SIM card to be able to make phone calls with your phone. Note: After turning off your phone, wait a few seconds before removing or inserting a SIM card. Take special care when handling the card as friction or bending can damage it.
The remaining battery charge is indicated by a white battery icon in the upper right corner of the screen. When the charge level is too low, the phone displays the message “Low battery”. Charger use: Place the battery correctly in the phone before charging. Connect the charger cable into the Micro USB port on the bottom. Insert the charger into a suitable socket. During charging, the icon on the screen will “blink” to indicate charging. The loading animation disappears when the loading process is complete.
Note: The battery powers the phone for a limited period of time. Make sure the battery is fully charged before using the phone. Make sure that the charger plug and the USB cable plug are inserted in the correct direction. Inserting them in the wrong direction may cause charging failure or other problems. Before charging, make sure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the charger. 3.
3.4 Telephone base assembly Phone Base Stand: Please open outward from the bottom of the base card stack to keep the phone obliquely level on the desk.
Using the phone Change the method in Spanish During regular use of your phone there will be times when you will need to enter text over and over again. Your phone allows you to enter text, letters, numbers or symbols (including punctuation marks). In any text editor, press the # key to change the input method. Entry method in Spanish Your LS140L phone has multiple input methods in Spanish. When you are typing in a text field, press the # key to change the method.
The phone will search for available Wi-Fi networks in its range. Tap a network to connect to it. If the network is open, you will be asked to confirm that you want to connect to that network. Secure networks are indicated by a padlock icon in which a password is entered. Connect to Bluetooth devices The Bluetooth function allows you to connect your phone to compatible Bluetooth wireless devices. Before using a Bluetooth device with your phone, you must pair it.
volume will be prompted. Please place the handle at the charging connection point of the base phone to ensure that there is enough power to use during the call. The low battery state may affect the clarity of the Bluetooth call. Please pay attention. Handle call can be switched to handle call or landline speaker call when the landline is in the call option.
Calls Make a call to a number in contacts Press the left selection key to access the Menu and then press the Contacts icon. Use the navigation keys to select the desired contact. Press the call key to make a call. Make a call to a number from the call log Press the left selection key to access the Menu and then press the Call Logs icon, or press the right selection key from the home screen for a shortcut to Call Logs. Use the navigation keys to select the desired contact. Press the call key to make a call.
5 . Multimedia and others Applications Camera: You can choose two models: photography and video. Image: View the images saved in the phone memory or on the memory card. Video: Use the video player function. Tape recorder: Start recording: Start audio recording. List of recorded files: List of files in the phone memory or SD card Memory: Set the storage memory. File format: Set the format of the saved file. FM Radio: Automatic search: Search and save FM stations automatically.
Additional features: My Files: My Files allows you to view and manage files and folders stored both in your phone's internal memory and on the microSD card, when one is inserted. Click a folder to view its contents and click the Back button to return to the parent folder. Wi-Fi: Connect your phone to the internet. Calendar: Press the left selection key to access the calendar screen.
8 Errata We invite you to read the Model LS140L User Manual before using the phone. SENWA LS140L Telephone Information: SENWA Landline Cell Phone, Model LS140 Unbranded antenna with TNC connector for LS140L telephone, 6-wire unmarked RJ-11 cable for LS140L SENWA model telephone base S130 phone headset SENWA Rechargeable Lithium-Ion Battery, LS140L model: 3.7 Vdc, 1000mAH, AC / DC adapter, SENWA Brand, LS140L Model: Input 100-240Vac 50/60 Hz, 0.
FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
