Excursion® 35807 Congratulations on your selection of the Excursion® 35807 from Northwestern Bell Phones. This quality 5.8GHz cordless telephone with Caller ID and Call Waiting, like all Genuine BELL® products, has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is easy to setup and operate. OWNER’S MANUAL# 35807 PAGE: Front Cover English U.S.
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at http://www.nwbphones.
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
INSTALLATION PRECAUTIONS 1. 2. 3. 4. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. MAINTENANCE 1. 2. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil.
3. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. In most, but not all areas, the sum of the RENs of all devices should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area. 4.
Excursion® 35807 CONTROLS DIAGRAM LCD Display NEW CALL/MSG LED Indicator Base Units Antenna /Visual Ringer Indicator TALK Button PAGE Button EDIT/FLASH Button Button UP RE/PA/DEL Button DN Button OPT/SCAN (Option/SCAN Button) IN USE/CHARGE LED Indicator Handset Jack #/ TONE(*)/ Button CALLS Button MENU/MUTE Button Button SAVE/PHONE BOOK Button Base Unit (Rear View) TONE PULSE 9VDC200mA TONE/PULSE Switch 090203A-1 LINE DC 9V Jack LINE Jack 5
DESCRIPTIONS Handset Controls: LCD Display - Shows call information, phone status, prompts and Phonebook items. NEW CALL/ MSG Indicator - Red LED blinks when you have call(s) and new message(s). TALK Button - Press this button to place a call, answer a call, or end a call. SAVE/PHONE BOOK Button – Allows you to retrieve a memory(name and phone number)for the personal Phonebook (up to 20 memories). Saves the changes on the listed items. TONE * / #/ Button - Press to move left on the large LCD Display.
IN USE/CHARGE LED Indicator -Lights up steadily when the phone is in talk mode and turns off when the handset is not in use. Also lights up steadily when paging the handset. Lights up steadily when the handset is being charged on the base and turns off when the handset is removed from its cradle. Visual Ringer Indicator - Flashes to indicate the phone is ringing, as a signal to the user, when the ringer is off.
Belt clip hook (Figure 2) WALL USE: Wall Mounting (Standard Wall Jack) 1. Install the wall mount bracket at the position as shown in Figure 3. 2. Connect the short telephone line cord to the TEL LINE jack.. 3. Connect the opposite end of the telephone line cord to the modular wall jack. 4. Align the wall mounting slots with studs located on the modular wall plate and slide base down to lock in place.
POWER CONNECTION CAUTION: You must use a Class II, 120 Volt AC/9 Volt DC adaptor that delivers at least 200mA. The center tip must be positive and the plug must correctly fit the unit’s DC 9V jack. 1. Plug the AC adaptor into a standard AC outlet. 2. Insert the small plug inot the DC 9V jack on the rear of the base unit as shown in Figure 6.
SETTING THE HANDSET RINGER ON/OFF MODE The handset must be set to ring ON mode in order to ring when receiving an incoming call. See Programs Operation section on “RING ON/OFF SETTING”. TELEPHONE OPERATION PLACE A CALL 1. Pick up the handset and press the TALK button. The Call Timer starts to count. The base unit IN USE LED indicator will light up. 2. Listen for a dial tone. 3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter the number. 4.
SAVING IN THE PHONEBOOK 1. Press the SAVE/PHONE BOOK button. 2. Press the EDIT/ FLASH button. 3. Use the TELEPHONE KEYPAD button(0-9) to enter the name, (see the “TELEPHONE KEYPAD CHARACTERS SETTING” section ) you can store up to 15 characters. 4. Press the button once. 5. Enter the telephone number using the TELEPHONE KEYPAD button(0-9). You can store up to 16 digits. 6. Press the SAVE/PHONE BOOK button to save into memory 7. Press the SAVE/PHONE BOOK button to go back to standby mode.
the appropriate KEYPAD button to get the following characters. KEYPAD BUTTON 1 2 3 4 5 6 7 8 9 0 CHARACTERS Space & , ( ) * . 1 ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 TUV8 WXYZ9 0 For example, If you want to enter the character “C” , press the “2” KEYPAD button, the first character displayed will be “A” . Press the “2” button again to display “B”, and press again to display the letter “C”. To enter the next character, press the appropriate button.
4. 5. 6. Press the SHIFT LEFT or RIGHT button to move the cursor to the letter or number you want to change. To erase, press the RE/PA/DEL Button To add, use the TELEPHONE KEYPAD buttons(0-9). Press the button to edit the number. Press and hold the SHIFT LEFT or RIGHT button to move the cursor to the number you want to change. To erase, press the RE/PA/DEL button. To add, use the TELEPHONE KEYPAD buttons(0-9). ALEX BROWIN 6045551212 cursor i s bl i nki ng 7. Press the SAVE/PHONE BOOK button to confirm.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing) 1. If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank by Phone , etc.), ensure that the Tone/Pulse switch on the rear of the base unit is set to the Pulse position. 2. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended.
CALLER ID OPERATION GETTING TO KNOW YOUR NEW PHONE IMPORTANT: Subscription to Caller ID (CID)/Call Waiting ID services from your local phone company is required for using the Caller ID/Call Waiting ID features of the Excursion® 35807. Your new Excursion® 35807 telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID.
RECEIVING NEW CALL • When you receive a new call, the call information is stored under CALLER ID List. The “NEW” segment of LCD Display and NEW CALL LED indicator will flash if there is new call(s). • When you receive a call, the system displays the caller information sent by the telephone company, called a Call Record. The Call Record consists of the following information: a. The caller’s name(if available) JOHN SMITH b. The caller’s telephone number 555-555-1212 # c.
ERROR 9:07AM 12/25 NEW2 TOTAL8 MSG Display shows when a voice mail message has been received and is stored by message waiting service provided by the phone company. RING: ON 9:07AM 12/25 NEW0 TOTAL39 VIP JOHN SMITH 888-555-1212 9:07 AM Display shows when the Caller ID information was received incorrectly or only part of the data was received. NOTE: When an error is received, none of the date from This call is saved in memory Display shows when the incoming call is a priority call.
PLACING A CALL FROM THE CALLER LIST 1. 2. 3. Press the CALLS button. Press the button or button to select the call record you wish to call back. If the number displayed is not correct(needing 7,10,11 digits), press the OPTION button to select call number. JOHN SMITH 555-555-1212 9:07AM 12/25 # 8 Press OPTION button JOHN SMITH 555-1212 9:07AM 12/25 # 8 Press OPTION button JOHN SMITH 15555551212 9:07AM 4. 5. 12/25 # 8 Press TALK button to dial out or press CALLS button to cancel dialing.
ERASE ALL? 555-1212 10:00AM 12/25 # 6 PROGRAMS OPERATION This unit contains the following special Programs: A. RING ON/OFF B. LANGUAGE C. FIRST RING ON/OFF D. TIME SET E. AREA CODE CONTRAST A. F. RING ON/OFF H. I. J. K. L. M. PBX MODE ON/OFF PAUSE TIME MSG WAITING AUTO ANSWER ON/OFF PRIVATE RING ON/OFF UNAVAILABLE RING ON/OFF PBXON/OFF NUMBER A. G.RING A. RING ON/OFF To turn on or off the ringing sound. RING:ON 1. Press and hold the MENU/MUTE button. # 1 TOTAL13 2.
3. Press the EDIT/FLASH button. 4. Use the TELEPHONE KEYPAD button to enter the month, date, hour and minute. The cursor moves automatically after entering each item. Press the TELEPHONE KEYPAD #1 for AM setting, or Press the TELEPHONE KEYPAD #2 for PM setting. 5. When the final setting is programmed, the time and date are automatically saved. 6. Press the MENU/MUTE button to go back to STANDBY mode.
5. Press the SAVE/PHONE BOOK button to save the setting. 6. Press the MENU/MUTE button to go back to STANDBY mode. NOTE: When placing a call in PBX mode ON, this telephone will automatically add the PBX number and a pause time before the dialed telephone numbers. I. PAUSE TIME This unit enables you to turn ON/OFF the PBX system depending on the telephone system you are using. PUASE TIME 1. Press and hold the MENU/ MUTE button. 2 2. Press the TELEPHON KEYPAD #9 button. # 9 TOTAL13 3.
NOTE: The phone will ring once when set to OFF mode unless first ring is set to OFF mode. M. UNAVAILABLE RING ON/OFF Turn on or off ring or all calls where the caller has blocked their caller ID. 1. Press and hold the MENU/MUTE button. 2. Press the button once. UNAVAIL RNG 3. Press the EDIT/FLASH button. On # 4. Press the or button to select ON or OFF. 13 TOTAL13 UNAVAIL RING ON is the preset mode. 5. Press the SAVE/PHONE BOOK button to save the setting. 6.
CHARGING 1. Make sure the adapter and telephone line cord are connected to the Excursion® 35807. 2. Place the handset on the base cradle. The CHARGE LED indicator of the base unit will light steadily. 3. Leave the handset charging on the base for 14 hours continuously to get a maximum charge. 4. The Excursion® 35807 is now ready for regular use. Discharge and charge the Ni-Cd battery again once you notice a decrease in the useable charge time. MAINTENANCE 1. 2.
TROUBLESHOOTING A. TELEPHONE UNIT TROUBLESHOOTING TABLE SYMPTOM No dial tone SOLUTION • • Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Check the RING ON/OFF mode on the handset. Set to RING ON mode to enable the handset ringer.
B. CALLER ID SYSTEM TROUBLESHOOTING TABLE SYMPTOM The Caller ID panel is blank The Caller ID does not show the caller’s name and/or phone number SOLUTION • • • • • • • Random characters and/or “NO DATA” appear on the LCD display Cannot get call Waiting identification on the LCD panel 090203A-1 • • Check the power connection. Check the telephone line cord connections. Check the batteries for proper installation.
AC ADAPTOR:USE ONLY WITH CLASS 2 POWER SOURCE, OUTPUT 9VDC, 200mA . THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER’S MANUAL. Distributed Exclusively Worldwide by Unical Enterprises, Inc., Industry, California, USA 35807/090203A-1 www.nwbphones.
