MICROCUT USER MANUAL FM121P
Installation • Only operate this product from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult an electrician. • Make sure the electrical outlet is easily accessible from the shredder. • Shredder must be operated only in upright position. • T o make sure the shredder has proper ventilation, place it a minimum distance of 2 in. (5 cm) from the wall or furniture. Safety Instructions 1. Read and follow all instructions before use.
! WARNING CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper shredder in an area less accessible to children. DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT, AS SERIOUS INJURY MAY OCCUR. Paper shredders can pull children’s fingers into the shredder mechanism. AVOID GETTING LOOSE CLOTHING OR JEWELRY NEAR THE FEED SLOT. AVOID GETTING HAIR NEAR THE FEED SLOT. NEVER spray any aerosol-based products in or around the shredder.
Shredder Diagram Rev/Off/Power Switch Paper Feed Throat Wastebasket Casters CREDIT CARD OVERHEAT REVERSE POWER OVERLOAD OFF DOOR OPEN POWER
Technical Specifications Model........................................................................................................................ FM121P Cutting Style........................................................................................................... Microcut Shred Size...................................................................................... 0.16” x 0.47” (4 x 12mm) Sheet Capacity.....................................................................................
Helpful User Tips Clearing a Jam If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam may result. Move the switch to the REVERSE (<<) position, and remove the excess paper from the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING. Once the paper is cleared, normal shredding operation can resume. If the shredder jams while in reverse, press the switch to the AUTO position and let shredder run to clear the jammed paper.
How To Maintain Your Shredder Lubricate Blades Regularly • Only use lubricants specifically designed for your shredder, such as shredder lubricant or shredder lubricant sheets. • NEVER use spray lubricants. • Follow directions on the shredder lubricant product package. • Do not touch the cutting surface. • Continue to recycle waste paper in a normal manner. When Using Shredder Lubricant Sheets Never tear or open a shredder lubricant sheet. Please, empty waste basket prior to use.
Limited Product Warranty The manufacturer warrants the machine for a limited time to be free from defects in material and workmanship. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at the manufacturer’s option and expense, of the defective part except for the shipping cost. It is the responsibility of the consumer to pay the shipping costs to return the machine to the manufacturer.
