Quick Start Guide

1608 4th Street Suite 200 Berkeley CA 94710
|
[e-mail]
|
P 510.548.4620 F 510.548.8264
Assemble
1
Quick Start Guide: FlexRadio Cabinet
A FlexRadio Cabinet assembly requires a single FlexRadio Cabinet module, omni
directional antenna, 6 foot coaxial cable, and the bracket/DIN mount kit.
FlexRadio Cabinet Installation Parts
FlexRadio Cabinet requires the following tools for installation:
• #2 Phillips bit screwdriver
• 0.75” ( 1.9 cm) hole saw or step drill bit with power drill
• Hand wrench
Tools Required
M3x4 mm screw x 4
Rail x 2
Use the Sensys Networks provided DIN or bracket mounts to install the FlexRadio Cabinet inside the trac cabinet.
Refer to Assembly Instructions Bracket and DIN Mounts for more information.
Install FlexRadio Cabinet
M3x4 mm screw x 4
Rail x 2
Install FlexRadio Cabinet
2
DRAFT