User Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Transmitter Certification

FCC ID: SDBIDTB001

FCC Rule Part: CFR 47 Part 24 Subpart D, Part 90 Subpart I, Part 101

Subpart C

ACS Report Number: 06-0011-LD

Manufacturer: Advanced Metering Data Systems, LLC

Equipment Type: Electricity Meter Transmitter

Trade Name: Sensus Integrated Display Transceiver

Model: IDTB001

User Manual

PAGE 1
Transmitter Certification FCC ID: SDBIDTB001 FCC Rule Part: CFR 47 Part 24 Subpart D, Part 90 Subpart I, Part 101 Subpart C ACS Report Number: 06-0011-LD Manufacturer: Advanced Metering Data Systems, LLC Equipment Type: Electricity Meter Transmitter Trade Name: Sensus Integrated Display Transceiver Model: IDTB001 User Manual 5015 B.U.
PAGE 2
AMDS iCon AMR Electric Meter Installation Guidelines Draft Copy
PAGE 3
INTRODUCTION: The following document briefly describes the installation of a Sensus AMDS iCon Transceiver equipped power meter. The scope of the document is to describe how to program the meter after proper installation by trained utility company technicians or licensed electricians. THIS METER IS ONLY TO BE INSTALLED BY QUALIFIED PERSONNEL! PROCEDURE: Confirm that the meter has been installed by a qualified entity or individual. Turn on the hand-held meter-programming device.
PAGE 4
COMPLIANCE INFORMATION: FCC: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 5
Photograph showing bar code position and 3:00 position for programming wand placement on meter.