Certification Exhibit FCC ID: SDBEZL01 IC: 2220A-EZL01 FCC Rule Part: CFR 47 Part 24 Subpart D, Part 101, Subpart C ISED Canada’s Radio Standards Specification: RSS-119, RSS-134 TÜV SÜD Project Number: 72129866 Manufacturer: Sensus Metering Systems, Inc.
FlexNet EasyLink™ Reader User Guide D R AF T 8 AUG-10061-01
Revision History Rev No. Date Description Rev 01 22-SEP-2017 Initial Release Copyright This document, in whole or in part, (“Document”) includes confidential and proprietary information belonging to Sensus USA Inc. and/or one of its subsidiaries or affiliates. Unauthorized use, reproduction, disclosure, distribution, or dissemination of this Document is strictly prohibited.
Contents Revision History.......................................................................ii Copyright................................................................................................ii 1 Introduction to FlexNet EasyLink™......................................4 Components..........................................................................................4 Specifications.........................................................................................
1 Introduction to FlexNet EasyLink™ FlexNet EasyLink™ is a hardware and software solution that is capable of reading both Sensus' FlexNet SmartPoint modules and ERT devices that operate with Standard Consumption Message (SCM) packets. The FlexNet EasyLink™ Reader is a transceiver, installed in a vehicle, running an application that can merge with your existing route management and billing processes.
Specifications Category Specification Dimensions 8" W x 12" D x 4" H (20.32cm W x 30.48cm D x 10.16cm H) Weight 18 lbs. (8.16 kg) Temperature -20°C to +50°C Operating, -40°C to +85°C Storage (-4°F to 122°F Operating, -40°F to 185°F Storage) Humidity 95% non-condensing, Operating & Storage Rated Voltage 12Vdc nominal Operating Voltage Range 10.5V minimum to 16V maximum DC Power Consumption <20 Watts in Receive Mode <60 Watts in Transmit Mode Output Power 6.
2 Setup the FlexNet EasyLink Reader The FlexNet EasyLink Reader and its' accessories are designed for using in a moving vehicle. Please follow all local safety regulations when operating a moving vehicle. 1. 2. Place the FlexNet EasyLink Reader in a secure location inside the vehicle. A side strap is provided on the EasyLink Reader to carry the unit to the vehicle or use one the provided nylon strap(s) as a shoulder strap.
Note: Make sure you do not close either antenna cable in the vehicle door or window as this can damage the cable. 5. 6. Connect to the ToughPad or your Windows enabled laptop via Bluetooth or use the provided USB Type A to USB Type B cable to connect from the FlexNet EasyLink Reader's USB port to the ToughPad/laptop. Connect the power cable from the power connector on the FlexNet EasyLink Reader to the vehicle's 12V power receptacle. The FlexNet EasyLink Reader powers up immediately when power is applied.
2. Connect to the ToughPad or a Windows equipped laptop via the USB cable or Bluetooth. • If connecting via a USB cable, you will need to check the version of Windows. If you are running an earlier version than Windows 7, you will not have the appropriate drivers and will need to download a virtual COM port (VCP) driver first. (Available at http://www.ftdichip.com/Drivers/VCP.htm). 3. 4. 5. • If connecting via Bluetooth, you will need to pair the FlexNet EasyLink Reader the first time it is connected.
6. Once all fields are filled in click the Connect button. If you are returned to the login screen the appropriate configuration files have downloaded and you may proceed with normal login. Bluetooth Pairing If this is the first time you have used a ToughPad or a laptop with the FlexNet EasyLink Reader you will need to establish the Bluetooth connections. 1. From the taskbar, click on the Bluetooth Devices icon and select Add a Device. 2.
LEDs The FlexNet EasyLink Reader incorporates LEDs to provide a visual indication of device health. The lights can be solid, flashing, or blinking. Flash is a rapid on/off, like a heartbeat, while Blink is a slower interval. LED indicators include: Bluetooth (BT): Solid Blue to indicate a connection, Flashing Blue indicates traffic, and Blinking Blue when waiting for a connection. ERT Status: Flashes Red during initial boot, Blinks Green when operating. ERT RX: Flashes Red when receiving messages.
Compliance Statements Warning: Sensus devices are for professional installation only. They are to be serviced by professional personnel only. This product is NOT for consumer installation or servicing. RF Radiation Hazard: In order to satisfy the FCC RF exposure limit for transmitting devices, a separation distance of 100 cm (39.37 inches) or more should be maintained while operating the Sensus FlexNet EasyLink Reader. To ensure compliance, operation at closer than this distance is not recommended.
Attention: ICES-003 Class B Notice-Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme à la norme NMB-003 du Canada. Warning: When applicable, there is danger of explosion if batteries are mishandled or incorrectly replaced. On systems with replaceable batteries, replace only with the same manufacturer and type or equivalent type recommended per the instructions provided in the product service manual.
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Attention: Mobile Antenna Installation Guidelines: These mobile antenna installation guildelines are limited to metal body motor vehicles or vehicles with appropriate ground planes.
