Narrowband PCS Transmitter Certification Test Report Model: AMDS-1000TR FCC ID: SDBAMDS1000TR ACS Report Number: 04-0166-24D Installation / User’s Guide Model: AMDS-1000TR Advanced Compliance Solutions FCCID: SDBAMDS1000TR
AMDS iCon AMR Electric Meter Installation Guidelines Draft Copy
INTRODUCTION: The following document briefly describes the installation of an AMDS iCon Transceiver equipped power meter. The scope of the document is to describe how to program the meter after proper installation by trained utility company technicians or licensed electricians. THIS METER IS ONLY TO BE INSTALLED BY QUALIFIED PERSONNEL! PROCEDURE: Confirm that the meter has been installed by a qualified entity or individual. Turn on the hand-held meter-programming device.
FCC INFORMATION: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Photograph showing bar code position and 3:00 position for programming wand placement on meter.