Specifications

ManualsBrandsSensThys ManualsElectronicsM-PWRSENS

Confidential Level(安全等級)

□

Public(公開)

█

Low(內部使用)

NOTE:

APPROVAL ON THIS PAGE SIGNIFIES THE ENTIRE DOCUMENT APPROVED

□

Medium(中度機密)

□

High(高度機密)

RU00-M08 SensArray RFID Board Specifications

03-18-2019 1. Change new doc format and combine

cover page.

陳宗正

REV

Change Order

DATE CHANGE INFORMATION AUTHOR

Document No.: 11-RU00-M08-X001-01

Page No.: 1 OF 14

APPROVED BY

胡錦華

胡錦華胡錦華

胡錦華

Summary of content (14 pages)

PAGE 1
Confidential Level(安全等級) □ Public(公開) █ Low(內部使用) NOTE: □ Medium(中度機密) APPROVAL ON THIS PAGE SIGNIFIES THE ENTIRE DOCUMENT APPROVED □ High(高度機密) RU00-M08 SensArray RFID Board Specifications . A2 REV 03-18-2019 Change Order 1. Change new doc format and combine cover page. DATE Document No.: 11-RU00-M08-X001-01 Page No.
PAGE 2
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 2 RU00-M08 SensArray RFID Board Specifications DATE: 03-18-2019 11-RU00-M08-X001-01 A2 陳宗正 03-18-2019 AS ISSUED REVISION HISTORY Document No.
PAGE 3
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 3 RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 DATE: 03-18-2019 RFID High Power SiP RU00-M08-X001 / X011 Datasheet Version 1.0.0 MTI Group Proprietary Information Any unauthorized use, duplication, reproduction, reverse engineering, decompilation, or disclosure of this document may be considered as infringement of MTI Group’s intellectual property rights, the infringer may be accused and liable applicable legal penalties.
PAGE 4
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 PAGE: 4 DATE: 03-18-2019 Table of Contents RU00-M08 SensArray RFID Board Specifications ............................................................................ 1 1.0 Introduction ........................................................................................................................... 5 2.0 Regulatory Statement .....................................................................
PAGE 5
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 5 RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 1.0 DATE: 03-18-2019 Introduction The RU00-M08 is a RFID Board that comprises a completely in integrated solution for EPC Gen 2 / ISO18000-63 (formerly 18000-6C) application. This document provides instructions to the end-user to ensure optimal performance in their OEM hardware.
PAGE 6
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 PAGE: 6 DATE: 03-18-2019 2.0 Regulatory Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 7
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 7 RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 DATE: 03-18-2019 between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 22 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
PAGE 8
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 8 RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 3.0 DATE: 03-18-2019 Specifications Item Description Specifications 1 RFID Protocol & Profiles EPCglobal UHF Class 1 Gen 2 / ISO18000-6C 2 Transmit Power +10dBm to +31.5dBm • Heat sinking or duty cycling required above +30dBm 3 Transmit Power Accuracy Room Temp. • +/- 0.5dB @ above 30dBm • +/- 0.75dB @ +27~ +30dBm • +/- 1.0dB @ +10dBm ~+27dBm Low/High Temp. • +/- 1.
PAGE 9
Confidential Level(安全等級安全等級)：Low(內部使用) PAGE: 9 RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 Item Description DATE: 03-18-2019 Specifications 13 14 Control Interface FFC Connector 115.2-921.6 kb UART 12pins, Refer the Pin Configurations 16 Dimensions 163.5*63.4*TBDmm 17 Operating Temperature 18 19 20 Storage Temperature PA lead Temperature Compliance -20 to +60°C *FW will reduce RF duty cycling to prevent PA lead temperature to exceed +85°C.
PAGE 10
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications DATE: 03-18-2019 11-RU00-M08-X001-01 4.0 PAGE: 10 Pin Configurations and Descriptions The module is 35-pin surface mount package (SMT compatible).
PAGE 11
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 5.
PAGE 12
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 6.0 PAGE: 12 DATE: 03-18-2019 Interfacing to the RU00-M08 Power and Ground All circuits on the RU00-M08 are powered from inputs at pin 11 and 12 of J6. The RU00-M08 operates with any supply voltage DC 48V +/- 10%. Because the individual supplies within the part are regulated on the RU00-M08, a large amount of supply filtering is not required. All 4 available ground pins of J6.
PAGE 13
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 7.0 PAGE: 13 DATE: 03-18-2019 Operating the RU00-M08 Once the required hardware connections are made to the RU00-M08, the unit can be operated with simple software routines running on the OEM’s host processor. The host software issues commands to configure the reader, set the reader’s idle mode and to start and stop various Gen2 RFID reader operations.
PAGE 14
Confidential Level(安全等級安全等級)：Low(內部使用) RU00-M08 SensArray RFID Board Specifications 11-RU00-M08-X001-01 8.0 PAGE: 14 DATE: 03-18-2019 Revision History Version Number 1.0.