User's Manual

ManualsBrandsSensor Switch ManualsElectronicsWireless Lighting Control Equipment

1 of 2

nIO BT Example: nIO BT LT

Series Temp / Humidity

nIO BT Handheld Programme r [blank] Standard

LT Low Temp

OVERVIEW

The nLight Handheld Programmer uses a Bluetooth Low Energy (BLE) Radio

Module to allow wireless communication between the local nLight zone and iOS/

Android smart phone application. This device oers two RJ-45 ports to be placed

in any location on a local nLight zone, and the unit powers up directly o of the

nLight bus. The smart phone application oers secure pairing with the BLE device

when within range (range specications below), and once connected can be used

for identifying and programming devices within that zone.

FEATURES

• Communicates two-way with local nLight network and iOS/Android Smart

Phone Application

• Remotely Configurable/Upgradeable

• Push-Button Programmable

• Inline Wired – No Mounting Required

• Self-powered from nLight bus

nIO BT

Handheld Programmer

ORDERING INFORMATION

SPECIFICATIONS

Warranty

Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may dier as a result of end-user environment and application.

Specications subject to change without notice.

Catalog Number:

Date: Project:

Example: nIO EZ PH ER

Size (Inline Wired): 2.54”H x 1.98”W x 1.00”D (6.45 cm x 5.03 cm x 2.54cm)

Weight: 2oz

Color: Clear (blue LED)

nLight Network Ports: 2 RJ-45

Bus Power Consumption: ~7 mA

Wires: None

Operating Temp: Standard: 14°-160°F (-10° to 71°C)

LT Option: -40º to 160ºF (-40º to 71ºC)

Relative Humidity: Standard: 20% to 75% non-condensing

LT Option 20 to 90% non-condensing

Wireless Frequency: BLE

Wireless Range Guidelines: Line of Site: ~50 ft

Plasterboard/Dry Wood: ~30 ft

Concrete: ~15 ft

RoHS Compliant, Title 24 Component

Summary of content (2 pages)

PAGE 1
Catalog Number: Date: Project: OVERVIEW The nLight Handheld Programmer uses a Bluetooth Low Energy (BLE) Radio Module to allow wireless communication between the local nLight zone and iOS/ Android smart phone application. This device offers two RJ-45 ports to be placed in any location on a local nLight zone, and the unit powers up directly off of the nLight bus.
PAGE 2
WIRING CAT-5e CAT-5e CAT-5e nBRG nPODM DX nIO BT nCM PDT 9 RJB CAT-5e nPP16 D INSTALLATION • Interconnect unit with other nLight devices in lighting zone using CAT-5e cables • Once power is received via CAT-5e connection, BLE radio will begin broadcasting presence • Open nLight Handheld Programmer App via Android/iOS smart phone, and follow instructions for pairing nIO BT: 911-00092-004 Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.