Wising Quick Installation Manual Statement : The instructions and manuals are subject fo change without notice. Not in conformity with the use of product specifications, installation and failure to fulfill the need of preventive maintenance or non-original products authorized by trying to adjust, repair or support, leading to the products and manuals for any errors, omissions or discrepancies directly or indirectly by the damage, the company does not afford liability.
Software produces, the statement: This product Is subsequently attached fo the installation of software (hereinafter referred to as "Software Product} belong to the Sensing TEK science and technology of all, only install and make use of this product.
Zigbee/HighPower Hardware manual Guide Directory : A) Product before the Operation oeeveeereeneeerenses P3 instructions B} Wising products and accessories C) Installation Technical Note D) Annex-Jump set up instructions / LED lights Description A) Product before the operation instructions 1) Te confirm contents of this package type and quantity of products. 2} Prepare product external equipment and related tools.
Zambezi Wireless Coordinator (USB) model : COZY | D USB Port Transmission Interface oo @ Reset Hardware Power Supply Reset @ SMA Antenna connector @ FUN Mode switching ® LED Green Communication signal @ LED Red Set / transmit signals © Antenna tidbit Omani directional antenna Communication mode 1. The USB cable to connect the wireless Coordinator and a separate computer terminals. 2.
Zambezi Wireless Coordinator (Ethernet) "2 mode! : COZY | ®@ Ethernet Port Transmission Interface LL @ Power Supply Port Hardware Power Supply Reset Pena _ Power supply ports @ FUN Antenna connector © LED Green ) Communication signal © LED Red Set / transmit signals @ Antenna Bid Omani-directional antenna Communication mode 1. Ethernet cable to connect the wireless Coordinator and a separate computer terminal. 2.
Zambezi Wireless temperature and humidity devices model : THZ100 © Power Power Switch @ Power Supply Port | Power Supply Port = ® External Connector | External expansion ports @ Sensing Stack Sensor window slot © FUN Mode switching | © LED Green I @Led Red | Set/transmit signals tidbit Unidirectional antenna The battery cover switch (AA alkaline batteries * 2) Power supply ports Communication mode 1. Confirmed that the wireless Coordinator for the communications status. 2.
Ghee Wireless Analog Input Transmitter Model : AIZ100 D Analogy Input Three groups of external analog signal @DIN Power Supply Port oo @ SMA ” Antenna connector @ FUN Mode switching © LED Green Communication signal ® LED Red @ Antenna @ Connector Communication mode 1. Confirmed that the wireless Coordinator for the communications status, 2. The wireless transmitter and detection equipment setup. 3.
5. The implementation of this module the software settings, + A/D Range be the same as with the Jump settings. (See Annex D-1) 8. Is set up, re-plug prows supply, you can enter the communication mode.
Set Mode 1. Before the transmitter set to be given on, it must to be sure the wireless Coordinator is set up. 2. Transmitter holding down the FUN key first. and then into the power supply. To be the first LED Green blinking three times, LED Red, after successive flashes off, and then once a FUN key to enter the setting mode operation method. 3. Configuration mode, LED Green off, LED Red constant light. 4. Reference to “Zambezi setup software manual (DY the implementation of group settings. 5.
Zambezi Wireless Digital Output Transmitter > model © DOZY @ Digital Output Add three digital signals @ DO Port Enable Switch | Dry-contact switch am power Supply Signorinas @ SMA Antenna connector & DUNG Mode switching ® LED Green Communication signal @ LED Red Set / transmit signals @ Antenna dBi Oman-directional antenna » © Connector pins Strip Communication mode 1. Confirmed that the wireless Coordinator for the communications status. 2.
5. Is set up, re-plug power supply, you can enter the communication mode. Ghee Wireless RS-485 Interface Transmitter Model : R52485 GRIND _ . kaddishes digital signals @ RS-485 Port Dry-contact switch ® DC IN Power Supply Interface @sMA Antenna connector 3 FUN Mode switching ® LED Green Communication signal @ LED Red Set / transmit signals @® Antenna tidbit Unidirectional antenna ® Connector [Se Strip So Communication mode 1. Confirmed that the wireless Coordinator for the communications status. 2.
To be the first LED Green blinking three times, LED Red, after successive flashes off, and then once a FUN key to enter the setting mode operation method. . 3. Configuration mode, LED Green off, LED Red constant light. 4. Reference to "Ghee setup software manual (D)” the implementation of group settings. 5. Is set up, re-plug power supply, you can enter the communication mode.
4. Communication process, LED Red showed flashes state signal transmission. Set Mode 1. Before the transmitter set to be given on, it must to be sure the wireless Coordinator is set up. 2. Transmitter holding down the FUN key first, and then into the power supply. To be the first LED Green blinking three times, LED Red, after successive flashes off, and then once a FUN key to enter the setting mode operation method. 3. Configuration mode, LED Green off, LED Red constant light. 4.
Communication mode 1. Confirmed that the wireless Coordinator for the communications status. 2. The wireless transmitter and detection equipment is set to complete. 3. After connecting power, LED Green blink three times before, LED Red, after successive flashes off, until the LED Green constant light, that is, modes of communication. 4. Communication process, LED Red showed flashes state signal transmission. Set Mode 1.
0) Accessories +D-1 Jump Set Description AE mp ANY Jump place 0-20mA 4-20mA Jump place Steps . 1. Confirmed detection equipment signal conversion mode (V / mA). 2. Cross-clamp removal by the shell. 3. Each wireless transmitter is only set up the same analog input signal mode. 4. Jump location in accordance with the icon to install assembly shell to complete the Jump setting.
» D-2 LED Light shows Red sustained have been lit State Show Description Normal ® & | LED Green has been | The normal communication Light Tit stats; blinking cycle of sending : and receiving signals based on LED Red Scintillation | the module which is different from the interval in seconds For {THZ 100} the normal 8 © LED Goren quench , communication state; blinking LED Red has been it | cycle of the module to send signals based on the number of seconds which is different from the interval Distress ® @ | LE
Note: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.