User's Manual

ManualsBrandsSensative ManualsElectronicsSensative Sensor

Strips MS-H Article # 1302002

Strips MS-WL Article # 1301002

User Manual

Hardware Description.......................................................................... 1

Features and Description.....................................................................2

Joining Strips............................................................................................3

Configuring Strips...................................................................................4-6

User Commands.....................................................................................7

Installation Instructions........................................................................8

Mounting Magnets.................................................................................9

Technical Information...........................................................................10

Summary of content (12 pages)

PAGE 1
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Hardware Description.......................................................................... 1 Features and Description.....................................................................2 Joining Strips............................................................................................3 Configuring Strips...................................................................................4-6 User Commands....................
PAGE 2
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Hardware Description Magnet sensor2 (For user commands) Battery Antenna Ambient light sensor Magnet Sensor1A Temp & humidity sensor LED Areas for the capacitive sensor used for waterdetection LoRa Transceiver Magnet Sensor1B Processor 1.
PAGE 3
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Multi-sensor - Measures ambient light (LUX) - Measures temperature and average temperature - Magnetic contact sensor Common Features - Easy Installation - Long-range - Up to ten year battery life - Compatible with LoRaWAN specification 1.0.3 MS-H Detects humidity MS-WL Detects water leak 2.
PAGE 4
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Joining Strips to your network Strips comes in transport mode, when both of the magnets are attached the device is idle. When removing the magnets for the first time, the device will automatically send a join request. *Tip : Make sure the device is set up on your server before removing the magnets for the first time.
PAGE 5
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Sensor Configuration After you have joined the device to the network, you are ready to configure the device towards your specification using our down-link generator at : www.sensative.com/loraconfig How to use the down-link generator : Step 1: Clink on the page titled "Enable Reports" and find the alarms or reports you wish to enable for your device. 4.
PAGE 6
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Step 2: Under "Related Configurations" click the configuration setting you wish to edit (non edited configurations will use default values that are described in the configuration description) Step 3: Review the description and enter the new value if you wish to change it from the default setting. Then click "Add configuration" 5.
PAGE 7
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Step 4: You may add/edit as many configuration and settings as you wish, once you have finished adding your settings, click the "Summarize and generate payload" button. Step 5: Review the configurations and reports that were edited, remove any if necessary. Step 6: Lastly, copy the payload and send the down-link via your server application on port 11.
PAGE 8
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 User commands 1. Sending open frame Move the magnet to the rounded edge 3 times ( see 3 green LED blinks at Sensative logo ) 1 short blink means the frame was sent (success) 5 red means there was no acknowledgment from the gateway 2. Factory reset To reset the device to the factory settings, move the magnet to the rounded edge 3 times, and on the 3rd pass hold the magnet for 10 seconds.
PAGE 9
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Installation instructions To mount MS-WL to base plate for water leak detection: Optional mounting plate instructions Mount Strips on "Strips side" of the mounting plate 8.
PAGE 10
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 How to mount magnets for door/window set up. When mounting the magnets, align magnets in any of these positions at the square edge of the Strip, with no more than 5mm space in between. 9.
PAGE 11
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 Technical Information Product Strips LoRa MS-H Sensor Features Product Strips LoRa MS-LW sensor Features Magnet sensor LED indication Temperature +/- 0.25 degree C accuracy Ambient Light 1-64000 LUX Flooding alert LED indication Temperature sensor (+/- 0.
PAGE 12
User Manual Strips MS-H Article # 1302002 Strips MS-WL Article # 1301002 PRODUCT /WARRANTY/WARRANTY PERIOD/DEFECT: Sensative AB (”Company”) warrants to the original end-user purchaser (“Purchaser”) that Strips (“Product”) will be free from substantial defects in material and workmanship from the date when the Product is delivered to the Purchaser and continues for twelve (12) months thereafter (“Warranty period”). The information contained herein is provided to the Purchaser as a convenience.