Instruction manual - XS Wireless 1 & XS Wireless 2

EM-XSW 2 rack receiver

Adjusting the volume of the audio outputs

Use the VOLUME control knob to set the level of the audio sig-

nal coming from the receiver’s audio outputs (Balanced/Un-

balanced). This audio signal can be output to a mixing console

or an amplifier, for example.

▷ Turn the VOLUME control knob to adjust the volume.

►

▷ Make sure that the signal in the next device in the signal

chain (e.g. mixing console, power amplifier, guitar amplifi-

er, etc.) is not overdriven.