Instruction manual - XS Wireless 1 & XS Wireless 2

EM-XSW 1 DUAL rack receiver
44
Outputting audio signals
Each of the two channels on the EM-XSW1 DUAL has both a
balanced XLR-3M output socket and an unbalanced 6.3 mm
(1/4") jack output socket.
The EM-XSW 1 has a balanced XLR-3M output socket and an
unbalanced 6.3 mm jack output socket.
▷ Always use only one of the two output sockets for each
channel.
►
To connect an XLR cable:
▷ Plug the XLR cable into the Balanced socket for the respec-
tive channel on the EM-XSW 1 DUAL.
To connect a jack cable:
▷ Plug the jack cable into the Unbalanced socket for the re-
spective channel on the EM-XSW 1 DUAL.
▷ Set the Line/Mic switch to the desired position for each of
the two channels.
• Line: when using instruments or other line sources with
the SK-XSW bodypack transmitter
• Mic: when using the SKM 825/835-XSW handheld trans-
mitter or a microphone with the SK-XSW bodypack trans-
mitter