Instruction manual - XS Wireless 1 & XS Wireless 2
EM-XSW 2 rack receiver
71
Adjusting the volume of the audio outputs
Use the VOLUME control knob to set the level of the audio sig-
nal coming from the receiver’s audio outputs (Balanced/Un-
balanced). This audio signal can be output to a mixing console
or an amplifier, for example.
▷ Turn the VOLUME control knob to adjust the volume.
►
▷ Make sure that the signal in the next device in the signal
chain (e.g. mixing console, power amplifier, guitar amplifi-
er, etc.) is not overdriven.