Instruction manual - XS Wireless 1 & XS Wireless 2

EM-XSW 2 rack receiver
67
SCAN menu item
Under the SCAN menu item, you can perform an automatic
frequency scan of your area. This enables you to easily find
and assign free radio frequencies.
Switch off all transmitters before you perform the scan. If
transmitters are still switched on, they are detected as un-
available frequencies and the frequencies that are actually
available cannot then be used.
▷ Press the UP or DOWN button until the SCAN menu item
appears in the display.
▷ Press the SET button to open the menu item.