Instruction manual

The Sennheiser TV Clear Set
Sennheiser TV Clear Set | 7
The Sennheiser TV Clear Set
General use
On the one hand, the „TV Clear Set“ allows you to connect wirelessly
to Bluetooth®-enabled devices such as cell phones, smartphones or
tablets. You can stream the stereo audio signal to the earbuds and
make hands-free phone calls.
On the other hand, you can use it to transmit the TV sound. Best
results are achieved when using the dedicated low latency interface
transmitter „TV Connector“. The transmitter can be connected to a
TV using a digital optical connection or an analog audio output.
Components of the TV Clear Set
The „TV Clear Set“ consist out of the „TV Clear Earbuds“ and the
transmitter „TV Connector“.
You can purchase the set or the single products on its own. Please
note that depending on whether you have the set or a single product,
the descriptions in this manual may have to be skipped.
Streaming stability
Line-of-sight between your earbuds and the connected device is not
required.
The connection range is typically up to 10 meters (30 ft).
The range may be reduced when the signal is obstructed by obsta-
cles such as walls or the human body.
Best results are achieved when using the earbuds in line of sight to
the connected device.
If the audio transmission is interrupted, reduce the distance and
avoid obstacles in between.