Instruction manual

Daily use
Sennheiser TV Clear Set | 23
How to control the earbuds
The earbuds offer two ways to control various features.
• Button control
Each earbud has a real button with click feeling in the middle of
the button surface.
The button on the right earbud is “up”, the button on the left ear-
bud is “down”. The buttons are not configurable.
• Configurable Touch Control
Each earbud has a touch control surface. To trigger the feature,
double-tap gently but clearly on the frame of the earbud. The
Touch Control can be configured by the TV Clear app.
The default configuration on the right earbud is Ambient Aware-
ness function Off/On and on the left earbud Pause/Resume play-
back.
• If you switched Bluetooth on after the earbuds were already
taken out of the charging case, or if you were out of range of
your phone, you can short press the earbud button to re-
connect.
• You can also stream from the phone if only one earbud was
removed from the charging case. The first earbud removed
from the charging case is your primary. This is important as
during a phone call the primary picks up your voice.
• When putting the primary back to the charging case, they
switch role and the other earbud will become the primary.
This will shortly interrupt your stream for about 5 seconds
as the remaining earbud must re-connect to the phone.
Controls only are active when the earbud is inserted into the
ear correctly.
Left
Right
Left
Right