Instruction manual

Daily use
22 | Sennheiser TV Clear Set
Daily use
Daily use of the transmitter TV Connector
Switching ON audio transmission
▷ Switch ON your TV or audio source. Make sure the transmitter has
power and its indicator light is green. The transmitter will auto
-
matically transmit the audio signal to the connected TV Clear
erbuds.
▷ You will hear the audio directly in your TV Clear erbuds.
▷ For more details on how to use the TV Clear earbuds please read
“Daily use of the TV Clear earbuds” (> 22).
Switching OFF audio transmission
▷ To end the transmission of the audio signal from the transmitter,
simply switch OFF the TV or audio source. The transmitter will go
into standby mode automatically after 3 minutes and stop
streaming.
Daily use of the TV Clear earbuds
Re-connection for every day use
1. Ensure Bluetooth is switched ON on your phone - or the transmit-
ter TV Connector is powered ON - before taking the earbuds out
of the case.
2. When removing the earbuds from the case they will connect to
the phone automatically within 12 seconds.
3. This is indicated in the phones status screen or the Bluetooth
menu (exact details may depend on your phone model)
The transmitter has no on/off button. To turn it off perma-
nently, remove the power source.
Auto ON
LED
The pairing as described in (> 17) is only needed once the
device are connected for the first time. They do not need to be
re-paired again.