Instruction manual
Table Of Contents
- Important safety instructions
- The Sennheiser TV Clear Set
- Package contents
- Product overview
- Getting started
- Daily use
- Daily use of the transmitter TV Connector
- Daily use of the TV Clear earbuds
- Re-connection for every day use
- How to control the earbuds
- Speech clarity settings
- Setting the volume
- Making a phone call
- Microphone pick up
- Phone call features
- Ambient awareness
- Pause and resume streaming
- Using the Sennheiser TV Clear app
- Charging the earbuds
- Charging the case
- Battery status indicators
- Cleaning the ear adapter
- Firmware update
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Getting started
Sennheiser TV Clear Set | 17
Getting started TV Clear earbuds
Switching earbuds ON or OFF is easy
The earbuds automatically switch on when removed from the case.
They switch off when back in the case.
The indicator lights will light up:
In the event an earbud switched off, a short press on the button
switches it on again.
Put the earbuds into pairing mode
1. Make sure both earbuds are placed in the case correctly.
2. Press and hold the pairing button for 2 seconds, until the indicator
light starts to blink blue.
3. Wait until all 3 indicator lights blink blue (this may take up to 10
seconds). The pairing mode will stop after 8 minutes or when the
pairing was successful.
4. Leave the earbuds in the case and continue to “Connecting your
earbuds to your phone (or tablet)” (> 18) or “Connecting your ear-
buds to the transmitter „TV Connector“” (> 19).
Indicator light Meaning
green Battery ok
red Battery <20%, consider charging
ON
short press
Hold
2s
All 3 LEDs
2
1