Instruction manual Digital 9000 System

Digital 9000 | 89
Using the SKM 9000
Overview of the menu items
“Tune”– Setting a frequency
Via the “Tune” menu item, you can set a frequency. The frequencies are
tuneable in 25 kHz steps. If you store your setting, the set frequency is
automatically assigned to the user-defined frequency preset “U”. The
radio microphone then changes from the currently set frequency preset to
the frequency preset “U” and transmits on the set frequency.
BA/B 60 accupack/battery pack:
charge status  100% |  70% |  30%
BA 60 accupack: remaining operating time in h:mm
Accupack/battery pack is completely discharged,
transmitter is not operational
Setting is being stored
Firmware is being updated
Firmware update has failed
Icon Name Function Page
Tune
Sets a frequency
89
Preset
Selects a frequency preset
90
Name
Enters a name
90
Gain
Adjusts the input gain
90
Low cut
Sets the low-cut filter
90
RF mode Adjusts the transmission mode 90
Display
Selects a standard display
90
Lock
Activates/deactivates the lock
mode
90
Test tone
Activates the test tone for level
matching the system and for
the walk test
90
Reset
Resets the factory default set-
tings
91
Information Displays the firmware version
and frequency range
91
Status display Meaning
2:204:40
6:59