Instruction manual Digital 9000 System

Digital 9000 | 87
Using the SKM 9000
Switching on the SKM 9000 on and checking the set frequency
before the RF signal is activated
왘 Switch on the SKM 9000 by keeping the ON/OFF button B pressed
until the “Name” standard display appears.
The RF signal is not activated and the transmission mode display “HD”/
“LR” flashes.
If you call up the “Tune” or “Preset” menu item within the next 10 seconds,
the RF signal remains deactivated until you exit the menu item. If you do
not call up one of the mentioned menu items, the RF signal is automatically
activated after 10 seconds.
To check the set frequency/the selected frequency preset:
왘 Call up the operating menu and press the UP button /DOWN button
until the “Tune” or “Preset” menu item appears.
The set frequency/the selected frequency preset is displayed.
If the displayed value is the desired one:
왘 Wait for 10 seconds to pass.
The RF signal is automatically activated and the transmission mode dis-
play “HD”/“LR” lights up constantly.
If t
he
displayed value is not the desired one:
왘 Call up the “Tune” or “Preset” menu item.
The RF signal remains deactivated until you exit the menu item.
The RF signal remains deactivated until you exit the menu item.
왘 Set the frequency (“Tune” menu item) or select a frequency preset
(“Preset” menu item) and store your setting.
The RF signal is activated and the radio microphone transmits an RF signal
on the set frequency.
Activating/deactivating the automatic lock mode
(Autolock)
The radio microphone has an automatic lock mode that can be activated or
deactivated via the “LOCK” menu item (see page 87).
To permanently activate the automatic lock mode:
왘 Call up the “LOCK” menu item and select “On”.
왘 Store your setting by pressing the SET bu
tton .
The automatic lock mode is activated and the lock mode icon 5 appears
on the standard display.
When the automatic lock mode is activated, you can still call up the oper-
ating menu, use the UP button /DOWN button to select menu
items (read-only function) and call up the “LOCK” menu item in order to
deactivate the automatic lock mode. If, however, you try to call up any
other menu item, the following display appears on the display panel: