Instruction manual Digital 9000 System

Using the EM 9046
84 | Digital 9000
Via the “Cable” menu item, you can emulate the lengths of instrument
cables in 3 steps: “type1”, “type2” and “type3”. If you select “line”, no
emulation takes place.
“live” operating mode – Using a configured
system
In “live” operating mode, you can select channels for headphone monitor-
ing and synchronize the transmitters and the receiver.
To prepare headphone monitoring:
왘 Connect headphones as described on page 38.
왘 Observe the warnings given there.
To select channels for headphone monitoring:
왘 Select a channel by pressing the channel 1–8 button M or press the
multiple channel selection button + and then select several channels
simultaneously.
In “live” operating mode, you can also activate channels for synchroniza-
tion:
왘 Select a channel by pressing the channel 1–8 button M.
왘 Proceed as described on page 77.
Channel 1–8 button
and
multiple channel
selection button +
+
If you have daisy chained several receivers (see “Daisy chaining
receivers” on page 35), you can monitor any channel of the daisy
chain via any headphone socket in the daisy chain.