Instruction manual Digital 9000 System

Using the EM 9046
78 | Digital 9000
If you manually set the frequency to a value outside the current 24 MHz
booster frequency range and confirm you setting by pressing the
button F, the following error message appears:
“Name” – Entering a channel name
Via the “Name” menu item, you can enter freely selectable names. The
channel name can consist of up to 8 characters from the following charac-
ter set:
“Cmd mode” – Configuring the audio and command outputs
You can use the command function e.g. for stage directions.
For this, you require the SKM 9000 COM radio microphone or the SK 9000
bodypack transmitter together with the KA 9000 COM command adapter.
By pressing the COMMAND button on the SKM 9000 COM or KA 9000 COM,
you can influence the routing of the audio signal of the receiver’s XLR-3
sockets C and sub-D socket D.
Frequency out of booster range
G U I T A R 1
name
`+` `,` `-` `|` `/` `0` `1` `2` `3` `4` `5` `6` `7` `8` `9` `*` `;` `<` `=` `>`
`space` `#` `A` `B` `C` `D` `E` `F` `G` `H` `I` `J` `K` `L` `M` `N` `O` `P`
`Q` `R` `S` `T` `U` `V` `W` `X` `Y` `Z`
toggle
cmd mode