Instruction manual Digital 9000 System

Using the EM 9046
76 | Digital 9000
“ch” operating mode – Configuring channels
In “ch” operating mode, you can configure channels. Some of the settings
that can be made can be synchronized via infra-red between the receiver
and the transmitters. These settings are marked with a in the col-
umn (see also next page).
In “ch” operating mode, you can also select channels for headphone mon-
itoring. To do so, proceed as described on page 84.
Overview of the “ch” menu
Main menu “Channel setup” Page
Frequency
Selects a frequency preset or
sets the frequency manually
77
Name Enters a channel name 78
CMD mode
Configures audio and com-
mand outputs
78
Ch standby Mutes the channels 79
Encryption
Binds the audio signal to the
receiver and protects against
eavesdropping
79
RF level rec
Records the antenna signals
and the diversity evaluation
80
Transmitter
setup
Calls up the extended menu
“Transmitter setup”
––
Extended menu “Transmitter setup” Page
Channel
setup
Calls up the main menu
“Channel setup”
–
RFmode
Adjusts the transmission
mode
82
Gain
Adjusts the transmitter’s
input gain
82
Low cut
Sets the transmitter’s low-cut
filter
82
Display
Selects the transmitter’s stan-
dard display
83
Lock
Activates/deactivates the
transmitter’s lock mode
83
AF source Displays the microphone head
(SKM)/audio source and cable
emulation (SK)
83
Cable
Emulates different instrument
cable lengths (SK)
83