Instruction manual Digital 9000 System

Digital 9000 | 51
Using the EM 9046
“sys”, “ch”, “live” – operating modes at a glance
“live” operating mode – Live transmission
In this mode, you can check, among other things, the following parameters
during transmission:
•RF level
• True bit diversity evaluation
• Audio level
• Charge status of the BA/B 60/61 accupack/battery pack
• Remaining operating time of the BA 60/61 accupack
More information on the “live” operating mode can be found from page 84
onwards.
“ch” operating mode – Setting up channels
In this mode, you can configure channels on the receiver and then synchro-
nize the transmitters and the receiver. More information on the “ch” oper-
ating mode can be found from page 76 onwards.
“sys” operating mode – Configuring the system
In this mode, you can configure transmitters and the receiver. More infor-
mation on the “sys” operating mode can be found from page 55 onwards.
Basic functions of the Sennheiser operating menu
A special feature of the Sennheiser 9000 series is the straightforward,
intuitive operating concept. As a result, you can act quickly and precisely –
even in stressful situations, for example on stage or during a live show or
presentation.
Selecting the operating mode
왘 Press the respective button to select the desired operating mode.
Calling up and selecting menu items, changing and storing
settings, cancelling an entry
In “ch” and “sys” operating mode, the following operating elements are
available:
live
ch
sys
sys
chlive
왘 Turn the jog dial to select a different menu item or a different setting.
왘 Press the jog dial to call up a menu item or to confirm a selection.
Jog dial
왘 Press the button F to store settings.
button
왘 Press the esc button to cancel entries.
esc
esc button