Instruction manual Digital 9000 System

Table Of Contents
Digital 9000 | 43
Preparing the Digital 9000 system for use
Inserting batteries into the B 61 battery pack
Insert the batteries (see diagram). Observe correct polarity when insert-
ing the batteries.
Removing and inserting the accupack/battery pack
To remove the accupack/battery pack:
Push the two catches and pull the accupack/battery pack away from the
bodypack transmitter as shown in diagram 2.
CAUTION
Damage to the bodypack transmitter and/or the accupack/battery pack!
If you touch the following contacts, they can become dirty or damaged:
Contacts for supply voltage and data contacts
of the bodypack transmitter
Charging and data contacts of the BA 61 accupack
Data contacts of the B 61 battery pack
Do not touch the contacts of the bodypack transmitter nor the contacts
of the BA 61 accupack/B 61 battery pack.
Only insert high-quality AA size batteries (e.g. lithium or alkaline
batteries) into the B 61 battery pack. Do not insert individual
rechargeable batteries such as NiMH cells.
When removing the accupack/battery pack, the settings of the
radio microphone are retained.
1 2