Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Digital 9000 | 19
Product overview
Overview of the displays and the clock LED
1 Frequency preset display
In addition, channel-related warnings are displayed in alternation with
the frequency preset display:
2 Diversity evaluation display (true bit diversity)
3 Antenna signal
display (dBm)
4 “HD”/
“LR” and “Command” display
5 “Encryption” display
6 Audio level display (dBfs)
7 Display for remaining operating time of the transmitter
For the pin assignment of the XLR-3 and sub-D sockets of the EM 9046, refer to the chapter “Specifications”
on page 123.
473
800
fs
473
800
473
800
473
800
fs
3:10
4
A A
HD
1
3:10
2
3
4
6
7
8
9
0
5
A1.7 A1.7 A1.7
CH3
A1.7
CH3
CH3 CH3
A Selected booster (type A or type B)
1 Selected booster frequency range (1 ... 8)
(bandwidth: 24 MHz)
7 Frequency preset (1 ... 40)
The frequency range set is outside the booster fre-
quency range
Charge status of accupack/battery pack is critical
No evaluable RF signal
Audio signal is overmodulated
No booster connected to one or both RF IN A/B
N-type sockets
Infra-red synchronization has failed
Audio signal of this channel is bound to the
EM 9046
A1.7
range
low bat.
no signal
peak
booster
sync fail
encryption