Instruction manual Digital 9000 System

Specifications
122 | Digital 9000
L 60 characteristics
Operating conditions
Storage and transport conditions
In compliance with
Input voltage 12 to 15 V
Input current max. 900 mA
Pin assignment of DC input
hollow jack socket
Charging voltage max. 4.2 V
Charging current max. 2 x 1,000 mA
Charging principle • CC CV method (Li-Ion charging method)
• Deep discharge recovery charge
• Capacity monitoring
• Accupack temperature monitoring
• Over/undercharge detection
• Charging time limit (approx. 8 hours)
Compatible Sennheiser
accupacks
• BA 60 (3.7 V, 1,600 mAh, Li-Ion)
• BA 61 (3.7 V, 2,030 mAh, Li-Ion)
Charging time with a completely discharged accupack and at room temperature
(approx. 20 °C/68° F):
• 100 %= approx. 180 min
• 70 % = approx. 60 min
• automatic security switch-off after approx. 8 hours
Dimensions approx. 80 x 87 x 62 mm (W x D x H)
Weight approx. 160 g (without mains unit)
Ambient temperature 0 °C to +35 °C
with reduced charging power: 0 °C to +45 °C
Relative humidity 25 % to 95 % (non-condensing)
Protection against dripping and
light splashing of liquids
the product must not be exposed to dripping and splashing (IP2X)
Ambient temperature 20 °C to +70 °C
Relative humidity 5 % to 95 % (non-condensing)
Protection against dripping and
light splashing of liquids
the product must not be exposed to dripping and splashing (IP2X)
Europe EMC: EN 61000-6-2
EN 61000-6-3
Safety: EN 60065
USA FCC 47 CFR Part 15 B
Canada Industry Canada ICES 003