Instruction manual Digital 9000 System

Specifications
118 | Digital 9000
SK 9000 characteristics
RF characteristics
Audio characteristics
Other characteristics
Frequency ranges 470 MHz to 798 MHz,
divided into 4 ranges:
A1–A4: 470–558 MHz
A5–A8: 550–638 MHz
B1–B4: 630–718 MHz
B5–B8: 710–798 MHz
(see page 114)
Frequeny ranges USA 550 MHz to 698 MHz,
divided into 2 ranges:
A5–A8: 550–607.9 MHz and 614.1–638 MHz
B1–B4: 630–697.9 MHz
(see page 114)
Switching bandwidth 88 MHz
RF output power “HD” mode:10 mW rms, 50 mW peak
“LR” mode: 25 mW rms, 50 mW peak
Frequency stability < 5 ppm
Tuneability in steps of 25 kHz
Antenna output coax socket
Mic/line input 3-pin special audio socket
Audio gain mic: adjustable in 3 dB steps from 0 dB to +42 dB
instruments: adjustable in 3 dB steps from -6 dB to +42 dB
line: adjustable in 3 dB steps from -6 dB to +42 dB
Input impedance mic: 22 k
instruments/line: 1 M
Lower cut-off frequency (-3 dB) mic: 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz
instruments/line: 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz
Instrument cable emulation cable length adjustable in 3 steps
Operating time 6.5 hrs (with BA 61 accupack)
Power consumption max. 960 mW
Dimensions 76 x 62 x 20 mm (H x W x D, with BA 61 accupack)
Weight approx. 147 g (with BA 61 accupack and belt clip)