Instruction manual Digital 9000 System

Digital 9000 | 115
Specifications
Operating conditions
Storage and transport conditions
EM 9046 characteristics
RF characteristics
Audio characteristics
Other characteristics
Ambient temperature -10 °C to +50 °C
Relative humidity max. 85 % at 40 °C (non-condensing)
Protection against dripping and
light splashing of liquids
the product must not be exposed to dripping and splashing (IP2X)
Ambient temperature -25 °C to +70 °C
Relative humidity max. 90 % at 40 °C
Protection against dripping and
light splashing of liquids
the product must not be exposed to dripping and splashing (IP2X)
Shock resistance as per IEC 68 or EN 60068, T2-27
Frequency range 470 to 934 MHz
Receiving channels up to 8
Receiver principle double superheterodyne
Diversity true bit diversity
Sensitivity “HD” mode: –86 dBm,
“LR” mode: 100 dBm
Antenna inputs 2 N-type sockets (50 )
Daisy chain outputs 2 N-type sockets (50 ),
amplification: 11 dB ±0.5 dB (related to booster input)
Daisy chainable receivers (HF) max. 4 EM 9046 (32 channels)
Audio output voltage XLR balanced, 10 dBu to +18 dBu in 1 dB steps (2 k)
Headphone output 2 x 100 mW at 32 , short-circuit proof
Digital audio output AES3-2003, XLR-3, 44.1 kHz; 48 kHz; 88.2 kHz or 96 kHz, 24 bit,
externally synchronizable
8 XLR-3 sockets and 1 multicore/sub-D socket (25-pin)
Audio output sockets can be equipped with 2 audio modules, analog (AAO), digital (DAO) or
mixed
8 XLR-3 sockets and 1 multicore/sub-D socket (25-pin) per audio module
Power consumption max. 250 W
Power supply 100 to 240 V~, 50/60 Hz
Mains connector 3-pin, protection class I as per IEC/EN 60320-1
Dimensions 177 x 449 x 496 mm (H x W x D, without handles)
Weight approx. 17 kg (fully equipped with 1 AAO, 1 DAO, 8 DRX)