Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
If a problem occurs ...
112 | Digital 9000
L 60 charger
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
Problem Possible cause Possible solution
The LED 1 does
not light up
Charger is not
connected to the
mains
Check if the L 60 is
connected to the NT 3-1
mains unit and if the mains
unit is connected to the
mains (see page 102).
Cascaded L 60
chargers are not
correctly connected
to one another
Check if a maximum of four
L 60 are correctly connected
to one another (see page
46).
More than four
chargers are
cascaded
Unstable voltage of
the mains unit
Replace the defective mains
unit or mains cable with a
new one.
Mains unit or mains
cable is defective
No contact with the
accupack
Insert the accupack correctly
into the charging
compartment (see page
102).
Contacts of the
accupack or contacts
of the charging
compartments are
dirty
Clean the charging contacts
of the accupack and of the
charging compartments
(see page 107).
Accupack is
defective (overaged
or defective
rechargeable
battery cells)
Replace the defective
accupack with a new one.
The LED 1 flashes
red
Wrong accupack/
individual
rechargeable
batteries/batteries
(primary cells) have
been inserted
Only charge BA 60 or BA 61
accupacks with the L 60
charger.
Accupack
temperature is too
low or too high/
air humidity too
high
Always recharge the
accupack within the
operating temperature range
and the air humidity range
stated in the specifications
(see page 122).
Accupack is
defective (overaged
or defective
rechargeable
battery cells)
Replace the defective
accupack with a new one.